{"title":"Cylinder Heads","description":null,"products":[{"product_id":"iag-600-street-cylinder-heads-package-for-2015-2021-wrx","title":"IAG 600 Street Cylinder Heads Package for 2015-2021 WRX","description":"\u003cp\u003e\u003cstrong\u003eIAG 600 STREET CYLINDER HEADS PACKAGE FOR 2015-2021 SUBARU WRX\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eENTRY-LEVEL STOCK REPLACEMENT HEADS\u003c\/strong\u003e\u003cbr\u003eThe IAG 600 Cylinder Heads are designed to function as an entry-level replacement for stock OEM 2015-2021 Subaru WRX heads. If your engine has suffered a catastrophic failure which requires replacement of your cylinder heads, or if you don't have OEM heads to start with, the IAG 600 Cylinder Heads are a perfect solution. These heads also work great for cars with basic bolt-on parts up to 600 BHP. These heads include upgraded GSC standard size valves, GSC Viton Valve Stem Seals, Kelford Valve Springs with Titanium Retainers, and OEM Keepers. FA20 Heads are configured differently from their EJ counterparts. In FA20 heads the casting is split into two parts, the \"lower\" and the \"cam towers.\" As the name suggests, the \"Cam Towers\" hold the camshafts to the cylinder head. Kelford EZ cams are available with IAG 600 Street Cylinder Heads. When Kelford cams are chosen we also include new OEM cam towers, rockers, pivots, and valve shim caps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBUILT WITH 100% NEW COMPONENTS\u003c\/strong\u003e\u003cbr\u003eEach IAG 600 FA20 DIT Cylinder Head Set starts with new OEM castings from Subaru of America. Next, you'll select whether or not you want to include our optional Kelford camshaft package. If selected, these heads will include Kelford EZ camshafts as well as new OEM cam towers, rockers, pivots, and valve shim caps.\u003c\/p\u003e\n\u003cp\u003eThe new castings are visually inspected and disassembled. Then the heads are fixtured in our Newen Valve Guide and Seat Machine to cut all intake and exhaust seats with a multi-angle valve job that suits the flow characteristics of GSC's standard size 34mm Intake and 29mm Exhaust valves. At this point, the heads' decks are resurfaced using our TS-3000 BlockMate, which cuts the aluminum to a smooth, even finish. Next, the heads are ultrasonically cleaned to remove debris and oils from the machining process. Finally, the heads are reassembled using GSC Stainless Intake and Exhaust Valves, GSC Viton stem seals, Kelford Dual Valve Springs with Titanium Retainers, and OEM Valve Keepers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOPTIONAL KELFORD \"EZ\" CAMSHAFT AND LIFTER PACKAGE\u003c\/strong\u003e\u003cbr\u003eIf you're planning for more power you'll want to select these Kelford EZ camshafts for your IAG 600 Head Package. These will not drop any low end power, and will create more power and torque across the entire RPM range. These are perfect for stock frame upgraded turbos or up to 500 WHP upgrades. Along with the camshafts we'll include all new OEM cam towers, rockers, pivots, and valve shim caps. Finally, We'll take care of setting bench lash using our specially designed fixture. (FINAL LASH SHOULD BE CHECKED AND ADJUSTED ONCE HEADS ARE INSTALLED)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIAG 600 Street Cylinder Head Package Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e(x2) Brand New Subaru OEM WRX FA20 Cylinder Head Castings\u003cbr\u003eMulti-Angle Valve Job\u003cbr\u003eResurface\u003cbr\u003eUltrasonic Cleaning\u003cbr\u003e(x8) GSC 32mm (Standard) Intake Valves\u003cbr\u003e(x8) GSC 29mm (Standard) Exhaust Valves\u003cbr\u003e(x16) Kelford Dual Valve Springs \u0026amp; Titanium Retainers\u003cbr\u003e(x16) GSC Valve Stem Seals\u003cbr\u003eOptional Camshaft Package Also Includes:\u003c\/p\u003e\n\u003cp\u003eKelford EZ Camshafts\u003cbr\u003e(x2) OEM Cam Towers \u0026amp; Hardware\u003cbr\u003e(x16) OEM Rocker Pivots\u003cbr\u003e(x16) OEM Lifters\u003cbr\u003e(x16) OEM Valve Lash Caps\u003cbr\u003eBench Valve Lash Service (Final Lash Should be Checked and Adjusted Once Heads are Installed)\u003c\/p\u003e","brand":"IAG","offers":[{"title":"Yes Include Belford EZ Cams \/ Cam Towers \/ Lifters \u0026 Rockers","offer_id":45924848500890,"sku":"IAG-ENG-H600L","price":5999.99,"currency_code":"USD","in_stock":true},{"title":"No I Only Want The Assembled Lower Portion of The Heads","offer_id":45924848533658,"sku":"IAG-ENG-H600E","price":3199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/IAG-ENG-H600-OPT-01__89472.jpg?v=1751997724"},{"product_id":"iag-800-cnc-pocket-ported-competition-cylinder-heads-package-2015-2021-wrx","title":"IAG 800 CNC Pocket Ported Competition Cylinder Heads Package 2015-2021 WRX","description":"\u003cp\u003e\u003cstrong\u003eIAG 800 POCKET PORTED COMPETITION CYLINDER HEADS PACKAGE FOR 2015-2021 SUBARU WRX\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDESIGNED WITH THE WEEKEND RACER IN MIND\u003c\/strong\u003e\u003cbr\u003eThe IAG 800 CNC Pocket Ported Competition Cylinder Heads are designed with the weekend racer in mind. These CNC pocket ported heads provide a significant upgrade in flow over the IAG 600 heads. These heads work great for cars with some race track duty (road, rally, auto-x, drag) and are designed to support up to 800 BHP with supporting mods. These heads include upgraded GSC +1mm Stainless Steel Valves, GSC Viton Valve Stem Seals, Upgraded GSC Valve Guides, Kelford Dual Valve Springs with Titanium Retainers, and OEM Keepers. FA20 Heads are configured differently from their EJ counterparts. In FA20 heads the casting is split into two parts, the \"lower\" and the \"cam towers.\" As the name suggests, the \"Cam Towers\" hold the camshafts to the cylinder head. Kelford \"A\" cams are available with IAG 800 Cylinder Heads. When Kelford cams are chosen we also include new OEM cam towers, rockers, pivots, and valve shim caps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBUILT WITH 100% NEW COMPONENTS\u003c\/strong\u003e\u003cbr\u003eEach IAG 800 FA20 DIT Cylinder Head Set starts with new OEM castings from Subaru of America. Next, you'll select whether or not you want to include our optional Kelford camshaft package. If selected, these heads will include Kelford \"A\" camshafts as well as new OEM cam towers, rockers, pivots, and valve shim caps.\u003c\/p\u003e\n\u003cp\u003eThe bare castings are visually inspected and the OEM guides are pressed out. The heads are then fixtured into our in-house Centroid 5-axis CNC Machine, one of the most advanced precision engine machining equipment in the world. The Centroid CNC performs a \"pocket port\" of the area under the valves, enlarging and blending the opening under the valves. The benefit of CNC porting is not only an efficient way of machining the heads it also offers consistent port results that are hard to achieve by hand. Once the Centroid completes the porting process the heads are drilled to fit larger 1\/2\" or 14mm head studs which are commonly used in high horsepower builds. Next, the OEM press-fit freeze plugs are removed, to avoid a common known failure in which they loosen and leak coolant into the engine oil as well as externally. To eliminate this problem each head is tapped and threaded plugs are installed. At this point, GSC Manganese-Bronze valve guides that are shaped to improve airflow are pressed into place then all the new intake and exhaust guides are diamond-honed in our honing station. The heads are then fixtured in our Newen Valve Guide and Seat Machine to cut all intake and exhaust seats with a multi-angle valve job that suits the flow characteristics of GSC's +1mm valves. The heads decks are then resurfaced using our TS-3000 BlockMate that cuts the aluminum to a smooth even finish. To remove debris and oils from the machining process, the heads are ultrasonically cleaned. Finally, the heads are reassembled using Kelford Dual Cylindrical Valve Springs and Retainers along with GSC Viton stem seals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT IS A POCKET PORT?\u003c\/strong\u003e\u003cbr\u003ePocket porting is enlarging and blending the area under the valve seat. This is one of the most critical areas to get right in any porting job. Luckily, our Centroid 5 axis cylinder head porting machine gets it perfect every time. The area about 1\" under the valve is enlarged and blended to ensure a smooth transition and increase power. The rest of the port is left alone because additional volume is not required at these power levels, and can even hurt velocity if there's not enough airflow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOPTIONAL KELFORD \"A\" CAMSHAFT AND LIFTER PACKAGE\u003c\/strong\u003e\u003cbr\u003eIf you're planning for more power you'll want to select these Kelford \"A\" camshafts for your IAG 800 Head Package. These cams are perfect for those seeking more power for their modified FA20 WRX. These cams will support up to 800 BHP. Along with the camshafts we'll include all new OEM cam towers, rockers, pivots, and valve shim caps. Finally, we'll take care of setting bench lash using our specially designed fixture. (FINAL LASH SHOULD BE CHECKED AND ADJUSTED ONCE HEADS ARE INSTALLED)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKEEP COOLANT OUT OF YOUR OIL WITH IAG'S FA20 CASTING PLUG MODIFICATION SERVICE\u003c\/strong\u003e\u003cbr\u003eSubaru made some interesting cost-cutting decisions when developing the FA20 cylinder heads. One such measure was the use of pressed in casting or \"freeze\" plugs on the head castings. These plugs are designed to cover the holes left during the casting process and contain the coolant inside the cylinder head. Unfortunately, the pressed in plugs have a tendency to become loose, and if they pop out you'll have oil and coolant mixing inside your timing cover and causing a huge mess and possibly costing you a new engine. We've developed a solution for this problem which involves carefully threading the opening for the casting plugs and installing new, threaded plugs that wont pop out. This is a must when going for higher horsepower in your FA20 equipped WRX.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIAG 800 CNC Pocket Ported FA20 DIT Cylinder Heads Package Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(x2) Brand New Subaru OEM AW20 FA20 WRX DIT Cylinder Head Castings\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(x8) GSC 35mm (+1mm) Intake Valves\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(x8) GSC 30mm (+1mm) Exhaust Valves\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(x16) Kelford Dual Cylindrical Valve Springs \u0026amp; Retainers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(x16) GSC Manganese-Bronze Valve Guides\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(x16) GSC Valve Stem Seals\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIAG Performance CNC Pocket Porting\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMulti-Angle Valve Job\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDrilling for compatibility with ½\" or 14mm Head Studs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThreaded Coolant Plug Upgrade\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResurface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUltrasonic Cleaning\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOptional Camshaft Package Also Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKelford \"A\" 272 Camshafts\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(x2) OEM Cam Towers \u0026amp; Hardware\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(x16) OEM Rocker Pivots\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(x16) OEM Lifters\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e(x16) OEM Valve Lash Caps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBench Valve Lash Service (Final Lash Should be Checked and Adjusted Once Heads are Installed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePower: The IAG 800 Cylinder Head Package has a power output rating of 800 BHP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuality Guaranteed - Available 24 Month\/24,000 Mile Warranty*\u003c\/strong\u003e\u003cbr\u003eWe stand behind every hand-built engine we produce. IAG's Standard Short Block Workmanship Warranty covers your short block for 12 months or 12,000 miles. We have also teamed up with a selection of IAG Certified Installation Facilities which offer up to a 24 month\/24,000 mile workmanship warranty when the engine is purchased, installed, and tuned by that IAG Certified Installer.\u003c\/p\u003e","brand":"IAG","offers":[{"title":"Yes Include Belford EZ Cams \/ Cam Towers \/ Lifters \u0026 Rockers","offer_id":45924854235290,"sku":"IAG-ENG-H800L","price":6999.99,"currency_code":"USD","in_stock":true},{"title":"No I Only Want The Assembled Lower Portion of The Heads","offer_id":45924854268058,"sku":"IAG-ENG-H800E","price":4249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/IAG-ENG-H800-OPT-01__00508.jpg?v=1751998781"}],"url":"https:\/\/envisiontuning.com\/collections\/cylinder-heads.oembed","provider":"Envision Tuning","version":"1.0","type":"link"}