{"title":"Performance","description":null,"products":[{"product_id":"eventuri-bmw-f10-m5-black-carbon-intake-system","title":"Eventuri BMW F10 M5 Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e BMW F10 M5 Black Carbon Intake System is engineered to reduce intake restriction and improve airflow delivery to the S63TU 4.4-liter twin-turbocharged V8. Developed through dynamometer testing, airflow analysis, and velocity optimization, the system replaces the factory intake housings and corrugated inlet connections with dual pre-preg carbon fiber Venturi filter housings, rigid carbon inlet tubes, and a dedicated front scoop and flow-deflector arrangement. Each component is designed to improve the airflow path from the front grille to the turbocharger inlets while managing exposure to heated engine compartment air.\u003c\/p\u003e\n\n\u003cp\u003eAt the center of the system are two Eventuri Venturi filter housings, each incorporating a reverse-mounted high-flow double-cone filter and an aluminum inlet cowl. The carbon housings progressively reduce in cross-sectional area from the filter toward the outlet, providing a smooth transition into the intake tubes. This geometry is designed to accelerate incoming air while limiting abrupt changes in airflow direction and cross-sectional area, reducing restriction through the intake tract.\u003c\/p\u003e\n\n\u003cp\u003eEventuri developed dedicated left- and right-side carbon fiber intake tubes to replace the factory corrugated flexible inlet connections. Manufactured from 100% pre-preg carbon fiber, each tube incorporates a CNC-machined aluminum MAF sensor mount and maintains a circular internal cross-section through the sensor mounting region. This design avoids the internal deformation and abrupt transitions associated with conventional sensor mounting bosses, preserving a consistent airflow passage toward the factory turbocharger inlet connections.\u003c\/p\u003e\n\n\u003cp\u003eThe carbon inlet tubes connect directly to the Venturi filter housings, creating a continuous intake path between the filtration elements and the turbocharger inlets. Their smooth internal geometry eliminates the convoluted sections of the original flexible tubing, which can introduce additional resistance and airflow disturbances. By reducing these restrictions, the system is intended to improve the efficiency of air delivery to the turbochargers, particularly as airflow demand increases with engine speed and load.\u003c\/p\u003e\n\n\u003cp\u003eTo provide the filters with a dedicated supply of outside air, Eventuri developed two carbon fiber front scoops that extend from the factory duct openings toward the front grilles. Unlike conventional flat scoop designs, the Eventuri components follow the contours of the grille openings and incorporate continuous curved surfaces to redirect incoming air into the factory ducting. This geometry is designed to minimize abrupt airflow deflection while increasing the amount of ambient air directed toward the intake assemblies.\u003c\/p\u003e\n\n\u003cp\u003eThermal management is addressed through two laser-cut aluminum shields with integrated flow deflectors. The openings of the Venturi filter housings are positioned within these deflectors, allowing incoming air from the front scoops and factory ducts to be directed toward the filters. The shields also help separate the filter openings from surrounding engine compartment heat and displace heated air from the immediate intake area.\u003c\/p\u003e\n\n\u003cp\u003eThe front scoops, factory ducts, and aluminum flow deflectors function together as a coordinated cold-air supply arrangement. Rather than enclosing the filters within completely sealed airboxes, Eventuri uses carefully positioned filter openings and directional airflow management to supply ambient air while limiting exposure to elevated engine compartment temperatures.\u003c\/p\u003e\n\n\u003cp\u003eExtensive development included dynamometer testing, maximum airflow velocity evaluation, and optimization of the Venturi housings and inlet tubes. The resulting intake architecture is intended to reduce resistance upstream of the turbochargers and improve throttle response. The revised filtration and inlet arrangement also produces a more pronounced induction sound under acceleration, particularly as turbocharger airflow demand increases.\u003c\/p\u003e\n\n\u003cp\u003eAll primary carbon components are manufactured from pre-preg carbon fiber with a high-gloss black finish. Application-specific silicone couplers and BMW-specification hose clamps complete the connections between the intake assemblies and factory turbocharger inlet hardware. The complete system is developed specifically around the packaging and airflow requirements of the BMW F10 M5 S63TU engine.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for the BMW F10 M5 with the S63TU 4.4-liter twin-turbocharged V8\u003c\/li\u003e\n\u003cli\u003eTwo Eventuri carbon fiber Venturi filter housings\u003c\/li\u003e\n\u003cli\u003e100% pre-preg black carbon fiber construction with high-gloss finish\u003c\/li\u003e\n\u003cli\u003eTwo reverse-mounted high-flow double-cone air filters\u003c\/li\u003e\n\u003cli\u003eTwo aluminum inlet cowls designed to guide airflow into the filter housings\u003c\/li\u003e\n\u003cli\u003eLeft-side pre-preg carbon fiber inlet tube with integrated MAF sensor mount\u003c\/li\u003e\n\u003cli\u003eRight-side pre-preg carbon fiber inlet tube with integrated MAF sensor mount\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminum MAF sensor mounting bosses\u003c\/li\u003e\n\u003cli\u003eCircular internal intake tube geometry maintained through the MAF sensor mounting regions\u003c\/li\u003e\n\u003cli\u003eReplaces the factory corrugated flexible inlet tubes\u003c\/li\u003e\n\u003cli\u003eTwo carbon fiber front air scoops extending toward the grille openings\u003c\/li\u003e\n\u003cli\u003eContinuous-radius scoop geometry designed to improve ambient-air delivery\u003c\/li\u003e\n\u003cli\u003eTwo laser-cut aluminum heat shields with integrated airflow deflectors\u003c\/li\u003e\n\u003cli\u003eFilter openings positioned within the flow deflectors for controlled cold-air delivery\u003c\/li\u003e\n\u003cli\u003eHigh-quality silicone couplers with BMW-specification hose clamps\u003c\/li\u003e\n\u003cli\u003eDeveloped through dynamometer testing and airflow optimization\u003c\/li\u003e\n\u003cli\u003eReplacement filters: Two (2) Eventuri Type B Generation 2 filters, EVE-661-G2-FTR\u003c\/li\u003e\n\u003cli\u003eIND product SKU: EVE-F10M5-CF-INT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178921488538,"sku":"EVE-F10M5-CF-INT","price":2395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/54991027595_c1daa8fe8d_h.jpg?v=1794444790"},{"product_id":"eventuri-bmw-f8x-m3-m4-black-carbon-intake-system-v2","title":"Eventuri BMW F8X M3 \/ M4 Black Carbon Intake System - V2","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e BMW F8X M3 \/ M4 Black Carbon Intake System – V2 is a flagship induction upgrade engineered specifically for the twin-turbocharged S55 engine. Designed as a complete sealed airflow solution rather than a simple filter replacement, the V2 system maximizes cold air delivery, improves airflow efficiency, and enhances throttle response while maintaining consistently low intake air temperatures.\u003c\/p\u003e\n\u003cp\u003eUnlike open-element intake systems that are susceptible to engine bay heat soak, the Eventuri V2 intake utilizes fully sealed carbon fiber Venturi filter housings paired with precision-engineered carbon ducts. These ducts integrate with the factory cold air channels to deliver a continuous supply of ambient air directly into the intake system while isolating the filters from heated engine bay air. The result is improved thermal efficiency and more consistent performance in both daily driving and demanding track conditions.\u003c\/p\u003e\n\u003cp\u003eEvery component has been engineered to optimize airflow quality from the front air scoops to the turbochargers. Carbon fiber intake tubes, integrated aluminum inlet cowls, and Eventuri's patented Venturi filter housings work together to create a smooth, uninterrupted airflow path with minimal turbulence and restriction. This allows the turbochargers to operate more efficiently while improving engine response and overall performance.\u003c\/p\u003e\n\u003cp\u003eConstructed entirely from premium pre-preg carbon fiber with a weave designed to complement BMW M Performance components, the V2 intake transforms the appearance of the engine bay while delivering measurable performance improvements. As one of Eventuri's most advanced intake systems, the V2 represents the evolution of their patented airflow philosophy—maximizing efficiency without compromising drivability, reliability, or OEM refinement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePre-preg carbon fiber construction with OEM-matching weave\u003c\/li\u003e\n\u003cli\u003ePatented sealed carbon fiber Venturi filter housings\u003c\/li\u003e\n\u003cli\u003eCarbon fiber intake ducts engineered to channel ambient air into the system\u003c\/li\u003e\n\u003cli\u003eDual Generation 2 high-flow air filters\u003c\/li\u003e\n\u003cli\u003eCarbon fiber intake tubes with integrated MAF sensor mounts\u003c\/li\u003e\n\u003cli\u003ePrecision aluminum inlet cowls for optimized airflow transition\u003c\/li\u003e\n\u003cli\u003eCarbon fiber front scoops for increased cold air supply\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel mounting brackets\u003c\/li\u003e\n\u003cli\u003ePremium silicone couplers with BMW-spec hose clamps\u003c\/li\u003e\n\u003cli\u003eComplete sealed intake system engineered for improved thermal stability and airflow efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-f8x-s55-carbon-charge-pipe-set\"\u003eEventuri BMW F8X M3 \/ M4 Carbon Charge Pipe Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-f8x-m3-m4-carbon-fiber-engine-cover\"\u003eEventuri BMW F8X M3 \/ M4 Carbon Fiber Engine Cover\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178921521306,"sku":"EVE-F8XMV2-CF-INT","price":2695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-f8x-m3-m4-s55-carbon-intake-system-v2-white-background.jpg?v=1794444790"},{"product_id":"eventuri-bmw-f-chassis-n55-black-carbon-intake-system-v2","title":"Eventuri BMW F-Chassis N55 Black Carbon Intake System - V2","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Black Carbon Intake System V2 for BMW F-Chassis vehicles equipped with the N55 engine embodies Eventuri’s “Complete System” design philosophy, delivering a carefully engineered balance between unrestricted airflow and consistent thermal efficiency. Developed through extensive real-world testing and aerodynamic analysis, this intake system establishes a new benchmark in performance, fitment, and craftsmanship for the F30, F22, and F87 platforms.\u003c\/p\u003e\n\u003cp\u003eAt the core of the system is Eventuri’s patented carbon fiber Venturi housing, designed to promote smooth, laminar airflow as it transitions toward the turbocharger. Unlike conventional cone filter setups paired with simple heat shields, the Venturi geometry reduces turbulence and aerodynamic drag, allowing the turbo to operate more efficiently across the rev range.\u003c\/p\u003e\n\u003cp\u003eTo maintain low intake air temperatures, Eventuri engineered a sealed carbon duct and heat shield combination which isolates the filter from engine bay heat. Working in conjunction with a dedicated carbon fiber air scoop, the system continuously channels cooler ambient air into the intake tract, supporting stable performance even under sustained load.\u003c\/p\u003e\n\u003cp\u003eThe intake tube is constructed from pre-preg carbon fiber and features an integrated MAF sensor mount for precise calibration and OEM-level drivability. Every component, from the composite materials to the laser-cut bracketry, has been developed to ensure seamless installation and long-term durability.\u003c\/p\u003e\n\u003cp\u003eThe V2 revision further refines airflow efficiency while enhancing engine response and induction acoustics. On the road, drivers can expect sharper throttle response, improved turbo spool characteristics, and a more pronounced intake sound without compromising everyday usability.\u003c\/p\u003e\n\u003cp\u003eFor enthusiasts seeking a premium intake solution that complements the performance character of BMW’s turbocharged inline-six, the Eventuri N55 V2 system remains one of the most thoroughly engineered upgrades available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered for BMW F-Chassis vehicles equipped with the N55 engine\u003c\/li\u003e\n\u003cli\u003ePatented pre-preg carbon fiber Venturi housing promotes laminar airflow\u003c\/li\u003e\n\u003cli\u003eGeneration 2 bespoke high-flow cone filter\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon sealing duct isolates the filter from engine bay heat\u003c\/li\u003e\n\u003cli\u003eCarbon fiber intake tube with integrated MAF sensor mount\u003c\/li\u003e\n\u003cli\u003eDedicated carbon air scoop channels cooler ambient air\u003c\/li\u003e\n\u003cli\u003eLaser-cut heat shield improves thermal efficiency\u003c\/li\u003e\n\u003cli\u003ePrecision laser-cut stainless steel mounting brackets\u003c\/li\u003e\n\u003cli\u003eHigh-quality silicone couplers with BMW-specification hose clamps\u003c\/li\u003e\n\u003cli\u003eEnhanced throttle response, turbo efficiency, and induction sound\u003c\/li\u003e\n\u003cli\u003eOEM-level fitment with factory mounting compatibility\u003c\/li\u003e\n\u003cli\u003eReplacement filter: (1) Eventuri Type B (EVE-661-G2-FTR)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178921554074,"sku":"EVE-N55V2-CF-INT","price":1475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/46929622671_937c92eaed_k.jpg?v=1794444790"},{"product_id":"eventuri-audi-b8-rs4-rs5-black-carbon-engine-cover","title":"Eventuri Audi B8 RS4 \/ RS5 Black Carbon Engine Cover","description":"\u003cp\u003eTransform the engine bay of your Audi B8 RS4 or RS5 with \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e’s precision-crafted pre-preg carbon fiber engine cover. Designed to elevate both aesthetics and craftsmanship, this upgrade replaces the factory cover with a lightweight, motorsport-inspired carbon centerpiece that commands attention the moment the hood is opened.\u003c\/p\u003e\n\u003cp\u003eConstructed from 100% pre-preg carbon fiber, the cover delivers exceptional strength, flawless weave alignment, and OEM-level fitment. For those looking to make an even bolder statement, the full carbon engine cover adds a striking contrast to the RS engine bay.\u003c\/p\u003e\n\u003cp\u003eWhether paired with Eventuri’s RS4 or RS5 intake system or installed as a standalone visual upgrade, this engine cover completes the look with unmistakable carbon presence and refined performance styling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits 2012-2015 B8 chassis RS4 and RS5\u003c\/li\u003e\n\u003cli\u003eGloss carbon finish\u003c\/li\u003e\n\u003cli\u003eDirect fit, no modifications required\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178921586842,"sku":"EVE-RS5-CF-ENG","price":895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-audi-b8-rs4-rs5-carbon-engine-cover.jpg?v=1794444790"},{"product_id":"eventuri-audi-b8-rs4-rs5-black-carbon-intake-system","title":"Eventuri Audi B8 RS4 \/ RS5 Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Audi B8 RS4 \/ RS5 Black Carbon Intake System is engineered to reduce intake restriction and improve airflow delivery to the 4.2-liter naturally aspirated FSI V8. Replacing the factory airboxes and associated inlet ducting, the system incorporates dual pre-preg carbon fiber Venturi housings, reverse-mounted high-flow filters, carbon fiber intake tubes, and dedicated cold-air ducts and front scoops. Eventuri reports independent dynamometer gains of 15-20 horsepower and 12-18 lb-ft of torque at the wheels.\u003c\/p\u003e\n\n\u003cp\u003eThe factory RS4 and RS5 airboxes use relatively small rectangular filter elements followed by abrupt transitions into circular intake tubes. Eventuri replaces this arrangement with two carbon fiber Venturi housings designed to provide a gradual reduction in cross-sectional area between the filters and throttle bodies. The revised geometry promotes a more consistent airflow velocity profile while reducing abrupt directional changes and flow separation within the intake tract.\u003c\/p\u003e\n\n\u003cp\u003eEach carbon housing surrounds a reverse-mounted, high-flow double-cone filter and incorporates an aluminum inlet cowl to guide incoming air toward the filtration surface. The housing transitions into a dedicated pre-preg carbon fiber intake tube, maintaining a smooth internal airflow path toward the factory throttle body. CNC-machined aluminum breather connections are integrated into the carbon tubes to retain the required engine ventilation interfaces.\u003c\/p\u003e\n\n\u003cp\u003eTo supply the intake housings with outside air, Eventuri developed dedicated carbon fiber ducts that interface with the factory front air entry locations. Flexible rubber sealing edges connect the stationary ducts to the engine-mounted Venturi housings, helping isolate the incoming air from engine compartment heat while accommodating normal engine movement. The ducts transition from the original air entry geometry into the circular openings of the carbon filter housings.\u003c\/p\u003e\n\n\u003cp\u003eDual pre-preg carbon fiber front scoops extend toward the front grille and incorporate a continuous curved profile to redirect incoming ambient air into the intake ducts. This arrangement is designed to improve the supply of outside air to the filters and support intake temperature recovery after periods of stationary heat soak.\u003c\/p\u003e\n\n\u003cp\u003eThermal management is further addressed through laser-cut stainless steel heat shields positioned between the intake assemblies and exposed exhaust manifolds. Heat-reflective lining on the shields helps reduce radiant heat exposure to the carbon components. The pre-preg carbon construction also provides a lower through-thickness thermal conductivity than conventional aluminum intake tubing, limiting conductive heat transfer into the intake tract.\u003c\/p\u003e\n\n\u003cp\u003eIndependent back-to-back dynamometer testing on a standard Audi B8 RS5 recorded gains of 15-20 horsepower and 12-18 lb-ft of torque at the wheels. Testing was performed on the same day with the hood closed, with intake temperatures monitored and multiple runs completed in both configurations. Additional testing on a B8 RS4 demonstrated gains of approximately 25 horsepower before peak engine speed and 25 lb-ft of torque in the midrange under the manufacturer's documented conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe complete intake incorporates application-specific stainless steel mounting brackets, aluminum inlet cowls, silicone couplers, and associated installation hardware. The carbon housings and intake tubes mount to the engine, while the front ducts remain connected to the factory air entry system. This arrangement allows the intake assemblies to move with the engine without compromising the flexible sealing interface between the housings and cold-air ducts.\u003c\/p\u003e\n\n\u003cp\u003eFor customers completing the engine compartment with matching carbon components, the \u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-audi-rs4-rs5-engine-cover-black-carbon\"\u003eEventuri Audi RS4 \/ RS5 Black Carbon Engine Cover\u003c\/a\u003e and \u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-audi-rs5-carbon-fiber-slam-panel-cover\"\u003eEventuri Audi RS5 Carbon Fiber Slam Panel Cover\u003c\/a\u003e are available separately. These components are not included with the intake system.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Audi B8 RS4 and RS5 models equipped with the 4.2-liter FSI V8\u003c\/li\u003e\n\u003cli\u003eDual pre-preg carbon fiber Venturi filter housings\u003c\/li\u003e\n\u003cli\u003eTwo reverse-mounted high-flow double-cone air filters\u003c\/li\u003e\n\u003cli\u003eTwo aluminum inlet cowls for controlled airflow entry\u003c\/li\u003e\n\u003cli\u003eTwo pre-preg carbon fiber intake tubes with integrated breather connections\u003c\/li\u003e\n\u003cli\u003eTwo carbon fiber cold-air intake ducts with flexible sealing interfaces\u003c\/li\u003e\n\u003cli\u003eTwo pre-preg carbon fiber front air scoops with continuous-radius profiles\u003c\/li\u003e\n\u003cli\u003eTwo laser-cut stainless steel scoop extension plates\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel heat shields with heat-reflective lining\u003c\/li\u003e\n\u003cli\u003eEngine-mounted intake assemblies designed to accommodate powertrain movement\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminum breather connections\u003c\/li\u003e\n\u003cli\u003eHigh-quality silicone couplers and OEM-specification hose clamps\u003c\/li\u003e\n\u003cli\u003eApplication-specific mounting brackets and hardware\u003c\/li\u003e\n\u003cli\u003eBreather hose removal tool included\u003c\/li\u003e\n\u003cli\u003eHigh-gloss black carbon fiber finish\u003c\/li\u003e\n\u003cli\u003eManufacturer-reported independent dyno gains: 15-20 wheel horsepower and 12-18 lb-ft of torque at the wheels\u003c\/li\u003e\n\u003cli\u003eReplacement filters: Two (2) Eventuri Type S Generation 2 filters, EVE-151-G2-FTR\u003c\/li\u003e\n\u003cli\u003eIND product SKU: EVE-RS5-CF-INT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178921652378,"sku":"EVE-RS5-CF-INT","price":2650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/24388275351_f8407d34c0_b.jpg?v=1794444790"},{"product_id":"eventuri-audi-b8-rs5-facelift-black-carbon-slam-panel-cover","title":"Eventuri Audi B8 RS5 Facelift Black Carbon Slam Panel Cover","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Black Carbon Slam Panel Cover for the Audi B8 RS5 Facelift is a precision-crafted engine bay upgrade designed to enhance the visual impact of the front-end while maintaining OEM-level fitment. Manufactured from 100% pre-preg carbon fiber in a high-gloss 2x2 twill weave, this component delivers the same material quality and surface finish found throughout the Eventuri carbon range.\u003c\/p\u003e\n\u003cp\u003ePositioned at the leading edge of the engine bay, the slam panel cover creates a seamless carbon fiber presentation when paired with other Eventuri components while also providing a refined standalone upgrade. The lightweight pre-preg construction ensures a perfect fit using the factory mounting locations, preserving the original structure and serviceability of the vehicle.\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for the facelift B8 RS5, the geometry follows the contours of the OEM panel for an integrated appearance that looks factory installed. The deep gloss carbon weave provides a premium motorsport aesthetic and completes the front section of the engine compartment with a clean, cohesive finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% pre-preg carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eGloss finish in 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003eDirect fit for OEM slam panel\u003c\/li\u003e\n\u003cli\u003eOEM mounting points retained\u003c\/li\u003e\n\u003cli\u003eLightweight and high-strength composite structure\u003c\/li\u003e\n\u003cli\u003eEngine bay visual enhancement\u003c\/li\u003e\n\u003cli\u003eDesigned for Audi B8 RS5 \u003cstrong\u003eFacelift models\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSKU: EVE-RS5-CF-SLM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178921619610,"sku":"EVE-RS5-CF-SLM","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-slam-cover-2_80b87751-5a63-4826-9e38-1982c2cd09b9.jpg?v=1794444790"},{"product_id":"eventuri-carbon-intake-system-replacement-filter-type-b","title":"Eventuri Carbon Intake System Replacement Filter - Type B","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Carbon Intake System Replacement Filter – Type B is engineered to restore the airflow, filtration efficiency, and performance of compatible Eventuri intake systems. Designed specifically for Eventuri's patented reverse-mounted filter architecture, this genuine replacement filter maintains the airflow characteristics and filtration performance originally engineered into the intake system.\u003c\/p\u003e\n\u003cp\u003eConstructed using a dry double-layer non-woven filtration media, the Type B filter meets ISO 5011 filtration standards while remaining completely safe for mass airflow (MAF) sensors. Unlike oiled filters, the dry design requires no maintenance oil, eliminating the possibility of sensor contamination while providing consistent airflow throughout its service life.\u003c\/p\u003e\n\u003cp\u003eA defining feature of the Type B filter is its dual-cone architecture. The internal cone distributes incoming air evenly across the entire filtration surface, while the precision-machined external cone guides airflow toward the center of the intake. Together, these features promote smooth airflow, reduce turbulence, and maximize the effectiveness of Eventuri's patented Venturi housing design.\u003c\/p\u003e\n\u003cp\u003eWhether replacing a filter during scheduled maintenance or keeping a spare available between service intervals, the Eventuri Type B Replacement Filter ensures your intake system continues to perform exactly as intended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Eventuri replacement air filter\u003c\/li\u003e\n\u003cli\u003eDry double-layer non-woven filtration media\u003c\/li\u003e\n\u003cli\u003eMeets ISO 5011 filtration standards\u003c\/li\u003e\n\u003cli\u003eSafe for MAF sensors — no oil required\u003c\/li\u003e\n\u003cli\u003eDual-cone design for optimized airflow distribution\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for compatible Eventuri intake systems\u003c\/li\u003e\n\u003cli\u003eIncludes one replacement filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-air-filter-cleaning-kit\"\u003eEventuri Air Filter Cleaning Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178921750682,"sku":"EVE-661-G2-FTR","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-replacement-air-filter-type-b-white-background.jpg?v=1794444790"},{"product_id":"eventuri-vag-2-0tfsi-carbon-intake","title":"Eventuri VAG 2.0TFSI Carbon Intake","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e VAG 2.0TFSI Carbon Intake System replaces the factory airbox with a patented carbon fiber Venturi housing, a high-flow double-cone filter, and a dedicated cold air duct. Developed for the EA888 2.0 TFSI platform, the system is designed to reduce intake restriction while improving the delivery of ambient air to the turbocharger.\u003c\/p\u003e\n\n\u003cp\u003eEventuri publishes performance gains of 16 to 25 horsepower and 15 to 22 ft-lb for this system. Separately, BR Performance in Belgium independently tested the intake on a Stage 1 tuned Golf and recorded a 19 horsepower increase on their in-house dyno.\u003c\/p\u003e\n\n\u003cp\u003eThe pre-preg carbon fiber housing incorporates a reverse-mounted double-cone filter and a tapered internal profile designed to provide a more efficient airflow path toward the factory turbo inlet tube. An aluminum cowl helps guide airflow into the housing.\u003c\/p\u003e\n\n\u003cp\u003eA dedicated carbon fiber duct supplies air from the front of the vehicle. On Golf applications, a grille-mounted scoop provides a direct ambient air feed. Eventuri evaluated both single-duct and double-duct configurations during development, ultimately selecting the single-duct design based on dyno testing.\u003c\/p\u003e\n\n\u003cp\u003eThe system incorporates laser-cut stainless steel mounting brackets and retains the factory turbo inlet tube and vacuum\/boost connection.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented pre-preg carbon fiber Venturi housing\u003c\/li\u003e\n\u003cli\u003eReverse-mounted high-flow double-cone air filter\u003c\/li\u003e\n\u003cli\u003eAluminum inlet cowl\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fiber intake duct\u003c\/li\u003e\n\u003cli\u003eLaser-cut front grille scoop and surround\u003c\/li\u003e\n\u003cli\u003eLaser-cut slam panel plate\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting brackets\u003c\/li\u003e\n\u003cli\u003eSupplied mounting hardware and hose clamp\u003c\/li\u003e\n\u003cli\u003eRetains factory turbo inlet tube and vacuum\/boost connection\u003c\/li\u003e\n\u003cli\u003eDyno-tested on stock and tuned vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-replacement-air-filter-type-b\"\u003eEventuri Carbon Intake System Replacement Filter – Type B\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-air-filter-cleaning-kit\"\u003eEventuri Air Filter Cleaning Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178921717914,"sku":"EVE-2TFSI-CF-INT","price":1025.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/32934217571_548bc69ccc_b.jpg?v=1794444790"},{"product_id":"eventuri-lamborghini-huracan-v10-black-carbon-intake-system","title":"Eventuri Lamborghini Huracan V10 Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Black Carbon Intake System for the Lamborghini Huracan V10 is a flagship-level performance solution developed to redefine airflow efficiency, induction sound, and engine bay aesthetics. Designed around Eventuri’s patented Venturi housing concept, this is a fully sealed intake system engineered to provide a smooth, laminar airflow path from the filters to the integrated MAF tubes, reducing turbulence and improving volumetric efficiency across the rev range.\u003c\/p\u003e\n\u003cp\u003eBy replacing the restrictive factory airboxes with sculpted pre-preg carbon fiber housings and model-specific heat shields, the system allows the naturally aspirated V10 to breathe more freely while maintaining optimal inlet air temperatures. The result is a dyno-verified performance increase of 12–15 horsepower and 20Nm of torque, sharper throttle response, and an unmistakable induction character which intensifies as the engine climbs through the upper rev range.\u003c\/p\u003e\n\u003cp\u003eEvery component is engineered for OEM-level fitment and long-term durability, from the integrated carbon MAF tubes to the custom-molded silicone couplers. Visually, the organic carbon fiber forms transform the Huracan’s engine bay into a centerpiece worthy of the platform.\u003c\/p\u003e\n\u003cp\u003eThis intake is developed exclusively for the Lamborghini Huracan V10. It is not compatible with the Audi R8 V10 or Huracan EVO models. Due to the increased airflow exceeding the factory MAF calibration range, a custom ECU tune is required to eliminate the check engine light and allow the system to operate correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eA custom ECU tune is required to remove the check engine light due to the increased airflow exceeding the factory MAF calibration range.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: EVE-HCN-CF-INT\u003c\/li\u003e\n\u003cli\u003eDyno-verified performance increase of 12–15hp and 20Nm of torque\u003c\/li\u003e\n\u003cli\u003ePatented Eventuri carbon fiber Venturi housings for smooth, laminar airflow\u003c\/li\u003e\n\u003cli\u003eFully sealed intake system for maximum thermal efficiency\u003c\/li\u003e\n\u003cli\u003ePre-preg black carbon fiber construction with OEM-level fitment and finish\u003c\/li\u003e\n\u003cli\u003eIntegrated carbon fiber MAF sensor tubes\u003c\/li\u003e\n\u003cli\u003eHigh-flow performance air filters\u003c\/li\u003e\n\u003cli\u003eModel-specific heat shields to minimize heat soak\u003c\/li\u003e\n\u003cli\u003eCustom-molded silicone intake couplers\u003c\/li\u003e\n\u003cli\u003eSharper throttle response and enhanced V10 induction sound\u003c\/li\u003e\n\u003cli\u003eReplacement Air Filters: 2 × Eventuri Type B Filters – EVE-661-G2-FTR\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178921783450,"sku":"EVE-HCN-CF-INT","price":2595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/52353710130_23f6f8349b_b.jpg?v=1794444791"},{"product_id":"eventuri-bmw-f-chassis-n55-black-carbon-engine-cover","title":"Eventuri BMW F-Chassis N55 Black Carbon Engine Cover","description":"\u003cp\u003e\u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e has redefined the engine bay of F-Chassis BMWs with a stunning 100% pre-preg carbon fiber engine cover designed specifically for the N55 platform. Crafted to elevate both aesthetics and quality, this carbon replacement transforms the look of your N55-powered F-Chassis’s engine compartment with a deep, high-gloss weave and OEM-level fitment.\u003c\/p\u003e\n\u003cp\u003eTo retain factory character, the original Roundel from the OEM engine cover is transferred and fitted onto the Eventuri carbon cover. This preserves the authentic BMW identity while showcasing the precision and finish of Eventuri’s carbon craftsmanship.\u003c\/p\u003e\n\u003cp\u003eThe result is a lightweight, motorsport-inspired upgrade that enhances the visual impact of the N55 engine bay without compromising OEM refinement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eF22 M235i\u003c\/li\u003e\n\u003cli\u003eF30 335i\u003c\/li\u003e\n\u003cli\u003eF34 335i\u003c\/li\u003e\n\u003cli\u003eF32 435i\u003c\/li\u003e\n\u003cli\u003eF33 435i\u003c\/li\u003e\n\u003cli\u003eF36 435i\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eBMW Roundel must be transferred from your OE engine cover; new Roundel not included\u003c\/li\u003e\n\u003cli\u003eDirect fit, no modifications required\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178921947290,"sku":"EVE-N55-CF-ENG","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-f-chassis-n55-engine-cover-front.jpg?v=1794444790"},{"product_id":"eventuri-audi-c7-rs6-rs7-black-carbon-intake-system","title":"Eventuri Audi C7 RS6 \/ RS7 Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Audi C7 RS6 \/ RS7 Black Carbon Intake System is engineered to reduce turbocharger inlet restriction while controlling intake air temperatures on the 4.0-liter twin-turbocharged V8. Replacing the factory airbox assembly, the system incorporates a fully enclosed pre-preg carbon fiber airbox, dual Venturi inlet tubes, two high-flow dry air filters, an enlarged carbon intake duct, and a dedicated front air scoop. Eventuri reports dynamometer gains of 15-19 horsepower and 13-17 lb-ft of torque, along with a measured 0.4-second reduction in 60-130 mph acceleration during V-Box testing.\u003c\/p\u003e\n\n\u003cp\u003eThe factory C7 RS6 and RS7 intake system must supply both turbochargers while operating in an engine compartment with substantial thermal exposure. Eventuri developed two independent airflow paths, each consisting of a high-flow double-cone filter and a carbon fiber Venturi tube connected to the corresponding factory turbocharger inlet pipe. This arrangement provides each turbocharger with a dedicated filter and a progressively narrowing intake passage designed to reduce restriction and improve airflow consistency.\u003c\/p\u003e\n\n\u003cp\u003eEach carbon Venturi tube incorporates a smooth internal transition matched to the filter neck and factory turbocharger connection. The gradual reduction in cross-sectional area is designed to accelerate incoming air while limiting abrupt changes in flow direction and cross-sectional geometry. Eventuri used computational airflow simulations during development to evaluate the velocity distribution and refine the transitions between the filters and turbocharger inlet tubes.\u003c\/p\u003e\n\n\u003cp\u003eThermal management is a central part of the C7 intake design. The engine compartment contains several sources of heat surrounding the factory airbox location, including the centrally mounted turbochargers, a heat exchanger positioned beneath the headlamp, and heated air discharged from the radiator area when the cooling fan operates. Rather than relying on exposed filters and localized heat shields, Eventuri encloses both filters within a dedicated carbon fiber airbox designed to separate the intake air supply from these surrounding heat sources.\u003c\/p\u003e\n\n\u003cp\u003eThe carbon airbox enclosure utilizes the available space created by removing the factory airbox and connects directly to a redesigned carbon fiber intake duct. This duct provides greater internal volume than the original component and channels ambient air from the front grille toward the enclosed filters. A dedicated carbon fiber scoop positioned behind the grille incorporates a curved profile to direct incoming air into the duct, supporting the replenishment of cooler outside air as vehicle speed increases.\u003c\/p\u003e\n\n\u003cp\u003eAdditional thermal protection is provided by a laser-cut heat shield with a gold reflective surface. Positioned between the carbon airbox and the turbochargers, the shield helps reduce radiant heat transfer from the upper engine compartment into the intake enclosure. During development, Eventuri also evaluated an exposed dual-filter arrangement and observed increased inlet temperatures, reinforcing the decision to use a fully enclosed carbon airbox.\u003c\/p\u003e\n\n\u003cp\u003eEventuri performed same-day back-to-back dynamometer testing with the factory intake and carbon intake system. The vehicle remained on the dynamometer during the intake change, the hood was closed for testing, and intake temperatures were monitored. The manufacturer reports gains of 15-19 horsepower and 13-17 lb-ft of torque, with improvements in engine response attributed to the revised inlet geometry and controlled intake air supply.\u003c\/p\u003e\n\n\u003cp\u003eRoad testing was also conducted using a V-Box data logger to measure acceleration over the same road section. The recorded 60-130 mph time decreased from 9.674 seconds with the factory intake to 9.274 seconds with the Eventuri system, an improvement of 0.400 seconds. The 100-200 km\/h acceleration time decreased from 8.420 seconds to 8.078 seconds, an improvement of 0.342 seconds. Both comparisons were conducted on the same day with the intake system as the documented change.\u003c\/p\u003e\n\n\u003cp\u003eThe complete assembly incorporates pre-preg black carbon fiber components, CNC-machined airbox mounting hardware, laser-cut stainless steel brackets, and the dedicated thermal shielding required for the application. The result is an integrated intake system developed around the airflow and thermal requirements of the Audi C7 RS6 and RS7 rather than a conventional exposed-filter conversion.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Audi C7 RS6 and RS7 models equipped with the 4.0-liter twin-turbocharged V8\u003c\/li\u003e\n\u003cli\u003eFully enclosed pre-preg black carbon fiber airbox with high-gloss finish\u003c\/li\u003e\n\u003cli\u003eTwo independent carbon fiber Venturi inlet tubes with integrated transitions to the factory turbocharger inlet pipes\u003c\/li\u003e\n\u003cli\u003eTwo high-flow Generation 2 double-cone air filters\u003c\/li\u003e\n\u003cli\u003eDedicated filtration path for each turbocharger\u003c\/li\u003e\n\u003cli\u003eVenturi tube geometry designed to reduce abrupt airflow transitions and inlet restriction\u003c\/li\u003e\n\u003cli\u003eCarbon fiber intake duct with greater internal volume than the factory duct\u003c\/li\u003e\n\u003cli\u003eCarbon fiber front air scoop positioned behind the grille\u003c\/li\u003e\n\u003cli\u003eSealed airbox architecture designed to limit exposure to heated engine compartment air\u003c\/li\u003e\n\u003cli\u003eLaser-cut heat shield with gold reflective thermal barrier\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel mounting brackets\u003c\/li\u003e\n\u003cli\u003eCNC-machined airbox mounting hardware\u003c\/li\u003e\n\u003cli\u003eComputational airflow simulations used during development\u003c\/li\u003e\n\u003cli\u003eManufacturer-reported dynamometer gains: 15-19 hp and 13-17 lb-ft\u003c\/li\u003e\n\u003cli\u003eV-Box 60-130 mph acceleration: 9.674 seconds stock versus 9.274 seconds with Eventuri\u003c\/li\u003e\n\u003cli\u003eV-Box 100-200 km\/h acceleration: 8.420 seconds stock versus 8.078 seconds with Eventuri\u003c\/li\u003e\n\u003cli\u003eReplacement filters: Two (2) Eventuri Type S Generation 2 filters, EVE-151-G2-FTR\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: EVE-C7RS6-CF-INT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178921980058,"sku":"EVE-C7RS6-CF-INT","price":2450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/35969564020_e17c9a8b78_b_d31afa79-caa3-4dd8-9eda-b21acf02d679.jpg?v=1794444790"},{"product_id":"eventuri-bmw-e9x-m3-s65-black-carbon-intake-system-gloss","title":"Eventuri BMW E9X M3 (S65) Black Carbon Intake System - Gloss","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e BMW E9X M3 (S65) Black Carbon Intake System – Gloss is a precision-engineered airflow upgrade developed to enhance the performance and induction character of BMW M's legendary naturally aspirated V8. Designed specifically for the high-revving 4.0L S65 engine, this system improves the factory intake architecture while preserving the balance, drivability, and throttle response that define the E9X M3.\u003c\/p\u003e\n\u003cp\u003eAlthough BMW's factory airbox is highly effective, Eventuri identified airflow restrictions downstream that limit breathing efficiency, particularly at higher engine speeds where the S65 delivers its greatest performance. The system replaces the restrictive factory intake tube with a sculpted pre-preg carbon fiber intake tube engineered to improve airflow velocity, reduce pressure loss, and provide a smoother transition into the factory airbox.\u003c\/p\u003e\n\u003cp\u003eTo further optimize performance, the intake incorporates a dedicated carbon fiber inlet scoop that increases the volume of ambient air entering the airbox. By supplying a greater volume of cooler outside air, the system helps reduce intake air temperatures while supporting more consistent power delivery during spirited driving and track use.\u003c\/p\u003e\n\u003cp\u003eRather than focusing solely on peak horsepower numbers, Eventuri engineered the intake as a complete solution that improves airflow efficiency throughout the operating range. The result is measurable horsepower and torque gains, sharper throttle response, enhanced induction sound, and improved acceleration while maintaining OEM-level refinement.\u003c\/p\u003e\n\u003cp\u003eConstructed from premium pre-preg carbon fiber and paired with precision-engineered supporting components, the gloss finish provides an OEM-plus engine bay appearance worthy of BMW's final naturally aspirated V8 M engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance Testing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDyno gains of 8–10 horsepower and 10–12 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eRoad dyno gains of up to 16 horsepower\u003c\/li\u003e\n\u003cli\u003eReduced intake air temperatures compared to the factory intake\u003c\/li\u003e\n\u003cli\u003e100–200 km\/h acceleration improved by approximately 0.3 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePre-preg carbon fiber intake tube with gloss finish\u003c\/li\u003e\n\u003cli\u003eMaintains the factory airbox while improving downstream airflow\u003c\/li\u003e\n\u003cli\u003eCarbon fiber inlet scoop for increased ambient air supply\u003c\/li\u003e\n\u003cli\u003eHigh-flow performance cone air filter\u003c\/li\u003e\n\u003cli\u003eCNC-machined breather adapter\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel debris guard\u003c\/li\u003e\n\u003cli\u003ePremium silicone coupler with OEM-spec hose clamps\u003c\/li\u003e\n\u003cli\u003eEngineered to improve throttle response, airflow efficiency, and acceleration\u003c\/li\u003e\n\u003cli\u003eDelivers measurable performance gains while maintaining OEM drivability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-bmw-e9x-m3-s65-black-carbon-intake-system-matte\"\u003eEventuri BMW E9X M3 (S65) Black Carbon Intake System – Matte\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178922012826,"sku":"EVE-E9X-CF-INT","price":965.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-e9x-m3-s65-carbon-intake-system-gloss-white-background.jpg?v=1794444790"},{"product_id":"eventuri-f8x-s55-f1x-s63-panel-filter-oem-intake","title":"Eventuri F8X S55 \/ F1X S63 Panel Filter - OEM Intake","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e F8X S55 \/ F1X S63 Panel Filter Set is a direct drop-in upgrade for the OEM intake airbox, designed for enthusiasts who want improved airflow and a premium filtration solution while retaining the factory intake housing. This replacement set follows the same engineering-first development philosophy behind Eventuri’s carbon intake systems, focusing on airflow efficiency, repeatable testing methods, and OEM-level integration.\u003c\/p\u003e\n\u003cp\u003eEach panel filter design is developed using CFD analysis and validated through prototype testing. This includes volumetric airflow evaluation, intake temperature monitoring, and dynamometer testing to ensure performance-focused airflow characteristics while maintaining reliable filtration for long-term engine protection.\u003c\/p\u003e\n\u003cp\u003eBecause these filters install directly into the factory air filter housing, no permanent modifications are required. Installation is straightforward and preserves the OEM appearance of the engine bay while upgrading the intake’s breathing capability with an engineered alternative to standard paper elements.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: EVE-F8XM-PF\u003c\/li\u003e\n\u003cli\u003eAlternate SKU: EVE-F10M5-PF\u003c\/li\u003e\n\u003cli\u003eDirect drop-in replacement for OEM intake air filter housings\u003c\/li\u003e\n\u003cli\u003eDeveloped using CFD analysis and validated through airflow, temperature, and dyno testing\u003c\/li\u003e\n\u003cli\u003eDesigned to improve airflow efficiency while maintaining effective filtration performance\u003c\/li\u003e\n\u003cli\u003eIncludes two panel filters per set\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178922143898,"sku":"EVE-F8XM-PF","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-s55-s63-panel-filter-set-white-background.jpg?v=1794444791"},{"product_id":"eventuri-air-filter-cleaning-kit","title":"Eventuri Air Filter Cleaning Kit","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Air Filter Cleaning Kit is a dedicated maintenance solution engineered specifically for Eventuri air filters. Developed to support Eventuri's patented reverse-mounted filter architecture, this kit helps maintain consistent airflow, filtration efficiency, and long-term durability while preserving the performance characteristics engineered into every Eventuri intake system.\u003c\/p\u003e\n\n\u003cp\u003eEventuri air filters utilize advanced non-woven filtration media tested to ISO 5011 standards, providing OEM-level filtration performance while supporting increased airflow. The cleaning solution is formulated to safely remove dirt, dust, and embedded contaminants without damaging the specialized filter media, restoring airflow and extending filter service life.\u003c\/p\u003e\n\n\u003cp\u003eFor Eventuri intake systems equipped with oiled filters, the kit also includes a precision-formulated filter oil designed to restore proper filtration performance after cleaning. When applied correctly, the lightweight oil evenly coats the filter media without excessive saturation, helping maintain optimal airflow while remaining safe for sensitive MAF sensors.\u003c\/p\u003e\n\n\u003cp\u003eRoutine maintenance is recommended approximately every 3,500 miles (5,600 km), depending on driving conditions. Before cleaning, loose debris should be removed using light agitation or a soft-bristle brush. If compressed air is used, avoid directing high-pressure air at close range to prevent damage to the filter media.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for Eventuri air filters\u003c\/li\u003e\n\u003cli\u003eMaintains airflow and filtration efficiency\u003c\/li\u003e\n\u003cli\u003eSupports Eventuri's patented reverse-mounted filter design\u003c\/li\u003e\n\u003cli\u003eSafe for Eventuri non-woven filtration media\u003c\/li\u003e\n\u003cli\u003eCleaning solution removes embedded contaminants without damaging filter fibers\u003c\/li\u003e\n\u003cli\u003eIncludes precision-formulated filter oil for applicable oiled Eventuri filters\u003c\/li\u003e\n\u003cli\u003eHelps maintain ISO 5011 OEM-level filtration performance\u003c\/li\u003e\n\u003cli\u003eRecommended maintenance interval: approximately every 3,500 miles (5,600 km)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-replacement-air-filter-type-b\"\u003eEventuri Carbon Intake System Replacement Filter – Type B\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-small-replacement-air-filter\"\u003eEventuri Small Replacement Air Filter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-carbon-intake-system-replacement-filter-type-d2\"\u003eEventuri Carbon Intake System Replacement Filter – Type D2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-carbon-intake-system-replacement-filter-type-d\"\u003eEventuri Carbon Intake System Replacement Filter – Type D\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-carbon-intake-system-replacement-filter-type-l\"\u003eEventuri Carbon Intake System Replacement Filter – Type L\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-e9x-m3-replacement-air-filter\"\u003eEventuri BMW E9X M3 Replacement Air Filter\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-carbon-intake-system-replacement-filter-type-rsq8\"\u003eEventuri Carbon Intake System Replacement Filter – RSQ8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-mercedes-c63-c63s-glc63-glc63s-amg-replacement-air-filter-set\"\u003eEventuri Mercedes-AMG C63 \/ GLC63 Replacement Filter Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-e39-m5-e52-z8-s62-panel-filter-set\"\u003eEventuri BMW E39 M5 \/ Z8 S62 Panel Filter Set\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-mercedes-g63-amg-carbon-intake-system-replacement-filter-set\"\u003eEventuri Mercedes-AMG G63 Replacement Filter Set\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178922078362,"sku":"EVE-FLC","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-air-filter-cleaning-kit-white-background.jpg?v=1794444790"},{"product_id":"eventuri-bmw-f-chassis-b58-black-carbon-intake-system","title":"Eventuri BMW F-Chassis B58 Black Carbon Intake System","description":"\n\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e BMW F-Chassis B58 Black Carbon Intake System is engineered to improve airflow efficiency and manage intake air temperatures on BMW models equipped with the turbocharged B58 inline-six engine. Replacing the factory airbox, the system combines Eventuri's patented carbon fiber Venturi housing with an integrated MAF tube, a dedicated carbon fiber cold-air scoop, and dual-layer thermal shielding. Eventuri reports performance increases of 12–15 hp and 14–18 lb-ft of torque.\u003c\/p\u003e\n\n\u003cp\u003eThe intake housing is manufactured from pre-preg carbon fiber and incorporates a reverse-mounted, high-flow double-cone filter. Its internal geometry transitions progressively from the filter opening into the integrated MAF section and toward the turbocharger inlet. By combining the filter housing and intake tube into a continuous carbon fiber assembly, Eventuri reduces the number of internal connections and abrupt changes in airflow direction found in conventional intake configurations.\u003c\/p\u003e\n\n\u003cp\u003eThermal management is a central component of the B58 intake design. A carbon fiber filter shroud works alongside a double-layer primary heat shield and a separate double-layer secondary shield positioned near the turbocharger inlet. Each aluminum shield incorporates an insulating air gap between its layers to reduce heat transfer from the adjacent exhaust manifold and surrounding engine components. Eventuri reports a temperature differential exceeding 90°C across the secondary shield during thermal testing.\u003c\/p\u003e\n\n\u003cp\u003eA dedicated pre-preg carbon fiber intake scoop mounts behind the front grille and directs incoming ambient air toward the factory duct openings. Its curved profile is designed to guide airflow into the intake feed while limiting abrupt directional changes. This arrangement supplies the shielded filter area with outside air while the vehicle is moving, without relying on a fully enclosed airbox.\u003c\/p\u003e\n\n\u003cp\u003eEventuri evaluated the system through back-to-back dynamometer testing on a standard BMW M240i, monitoring temperatures to maintain consistent test conditions. The resulting measurements showed increases in power and torque across a substantial portion of the engine speed range, with the intake designed to operate with the factory engine management system.\u003c\/p\u003e\n\n\u003cp\u003eFor a coordinated carbon fiber engine bay configuration, the intake can be paired with the \u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-bmw-b58-carbon-engine-cover\"\u003eEventuri BMW B58 Carbon Engine Cover\u003c\/a\u003e, available separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for BMW F-Chassis models equipped with the turbocharged B58 inline-six engine\u003c\/li\u003e\n  \u003cli\u003eManufacturer-reported performance gains of 12–15 hp and 14–18 lb-ft of torque\u003c\/li\u003e\n  \u003cli\u003ePatented pre-preg carbon fiber Venturi housing with integrated MAF tube\u003c\/li\u003e\n  \u003cli\u003eReverse-mounted, high-flow double-cone performance air filter\u003c\/li\u003e\n  \u003cli\u003eContinuous carbon fiber housing and inlet tube architecture\u003c\/li\u003e\n  \u003cli\u003ePre-preg carbon fiber cold-air scoop positioned behind the front grille\u003c\/li\u003e\n  \u003cli\u003ePre-preg carbon fiber filter heat shroud\u003c\/li\u003e\n  \u003cli\u003eDouble-layer primary heat shield with insulating air gap\u003c\/li\u003e\n  \u003cli\u003eDouble-layer secondary heat shield protecting the turbocharger inlet area\u003c\/li\u003e\n  \u003cli\u003eAluminum inlet cowl and CNC-machined MAF mounting boss\u003c\/li\u003e\n  \u003cli\u003eLaser-cut mounting brackets and application-specific installation hardware\u003c\/li\u003e\n  \u003cli\u003eDesigned to retain factory MAF sensor operation\u003c\/li\u003e\n  \u003cli\u003eEventuri manufacturer part number: EVE-B58-CF-INT\u003c\/li\u003e\n\u003cli\u003eReplacement filter: (1) Eventuri Type B (EVE-661-G2-FTR)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178922111130,"sku":"EVE-B58-CF-INT","price":1395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/36160103865_0bc97deff8_b.jpg?v=1794444791"},{"product_id":"eventuri-bmw-e85-e86-z4m-s54-black-carbon-intake-system","title":"Eventuri BMW E85 \/ E86 Z4M S54 Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e BMW E85 \/ E86 Z4M Black Carbon Intake System replaces the factory airbox on the naturally aspirated S54 inline-six with a sealed carbon fiber housing. Eventuri developed it from their E46 M3 system through extensive data logging, dyno testing and design optimization, with the stated aim of working with the stock ECU map and MAF sensor. They publish a gain of 10 to 15 horsepower and 8 to 12 ft-lb.\u003c\/p\u003e\n\n\u003cp\u003eThe system is built around Eventuri’s patented carbon fiber housing. The housing encapsulates the filter and its internal cross-section reduces smoothly as it tapers toward the MAF tube, accelerating the airflow and reducing turbulence on its way out of the filter. An anodized aluminum inlet cowl completes the flow path. The filter is a deep-pleated, high-flow double-cone element, supplied dry to avoid damaging the MAF sensor.\u003c\/p\u003e\n\n\u003cp\u003eAirflow then passes into a CNC-machined, anodized aluminum MAF tube. Eventuri machines the MAF boss itself from an engineering plastic, designed to reduce conductive heat transfer to the MAF sensor. A machined recess in the tube allows the rubber gasket from the stock airbox to be reused, sealing the tube into the factory elbow.\u003c\/p\u003e\n\n\u003cp\u003eThe housing sits inside a laser-cut, powder-coated aluminum heat shield lined with neoprene, which shrouds the intake from engine bay heat and captures the ambient air fed in by the scoop. The laser-cut aluminum air scoop directs that air into the filter opening, which Eventuri states keeps intake air temperatures down. It clicks into the factory hole locations with supplied push rivets, with no drilling required.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDeveloped for the BMW E85 \/ E86 Z4M with the S54 engine\u003c\/li\u003e\n\u003cli\u003ePatented carbon fiber Venturi filter housing\u003c\/li\u003e\n\u003cli\u003e100% pre-preg carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum inlet cowling\u003c\/li\u003e\n\u003cli\u003eDeep-pleated, high-flow dry double-cone filter\u003c\/li\u003e\n\u003cli\u003eCNC-machined and anodized aluminum MAF tube with an engineering-plastic MAF boss\u003c\/li\u003e\n\u003cli\u003eLaser-cut, powder-coated aluminum heat shield with neoprene lining\u003c\/li\u003e\n\u003cli\u003eLaser-cut, powder-coated aluminum air scoop\u003c\/li\u003e\n\u003cli\u003eSilicone coupler with BMW-specification hose clamps\u003c\/li\u003e\n\u003cli\u003eInstalls at factory mounting points with no cutting or drilling\u003c\/li\u003e\n\u003cli\u003eNo ECU remap required\u003c\/li\u003e\n\u003cli\u003eReplacement filter: (1) Eventuri Type B (EVE-661-G2-FTR)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178922176666,"sku":"EVE-Z4M-CF-INT","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-bmw-z4m-carbon-intake-components.jpg?v=1794444795"},{"product_id":"eventuri-bmw-f06-f12-f13-m6-black-carbon-intake-system","title":"Eventuri BMW F06 \/ F12 \/ F13 M6 Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e carbon intake system for the BMW F06, F12, and F13 M6 has been engineered to provide a complete and aerodynamically optimized airflow path from the front air feeds to the turbo inlets. Developed through extensive dyno testing, real-world performance validation, and flow optimization, this system reduces restriction to the S63TU twin turbochargers while maintaining stable intake air temperatures.\u003c\/p\u003e\n\u003cp\u003eAt the core of the intake are Eventuri’s patented carbon fiber Venturi housings, which encapsulate the bespoke high-flow double cone filters. This design maintains laminar airflow as it transitions from the filters into the carbon intake tubes with integrated MAF sensor mounts, allowing the turbos to operate with reduced drag and improved efficiency across the entire rev range.\u003c\/p\u003e\n\u003cp\u003eThe system also replaces the restrictive factory ducting with carbon fiber front scoops and extended ducts to ensure a consistent supply of ambient air. Aluminum inlet cowls and laser-cut heat shields with integrated flow deflectors help guide airflow smoothly into the filter housings while protecting the intake charge from engine bay heat.\u003c\/p\u003e\n\u003cp\u003eEvery component has been developed as part of a complete intake solution rather than an open cone conversion, resulting in sharper throttle response, improved turbocharger response, and a significant visual upgrade to the engine bay through Eventuri’s signature pre-preg carbon fiber construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 carbon fiber patented Venturi filter housings\u003c\/li\u003e\n\u003cli\u003e2 bespoke high-flow double cone air filters\u003c\/li\u003e\n\u003cli\u003eLeft and right carbon fiber intake tubes with integrated MAF sensor mounts\u003c\/li\u003e\n\u003cli\u003e2 aluminum inlet cowls for smooth airflow entry\u003c\/li\u003e\n\u003cli\u003e2 carbon fiber front scoops\u003c\/li\u003e\n\u003cli\u003e2 carbon fiber scoop extensions\u003c\/li\u003e\n\u003cli\u003e2 laser-cut aluminum heat shields with integrated flow deflectors\u003c\/li\u003e\n\u003cli\u003eHigh-quality silicone couplers with BMW specification hose clamps\u003c\/li\u003e\n\u003cli\u003eComplete system designed to reduce turbocharger resistance\u003c\/li\u003e\n\u003cli\u003eImproved throttle response and turbo efficiency\u003c\/li\u003e\n\u003cli\u003e2x replacement filters required – Type B (EVE-661-G2-FTR)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178922209434,"sku":"EVE-F1XM6-CF-INT","price":2545.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/54991027595_c1daa8fe8d_h_97918bc4-bf7b-4bc0-a407-50b3a6f55ee4.jpg?v=1794444796"},{"product_id":"eventuri-bmw-e46-m3-black-carbon-intake-system","title":"Eventuri BMW E46 M3 Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e BMW E46 M3 Black Carbon Intake System is engineered specifically for the high-revving S54 inline-six, combining Eventuri's patented Venturi housing design with a dedicated cold-air feed to improve airflow efficiency, throttle response, and induction sound. Developed as a complete intake system rather than a conventional cone filter upgrade, the Eventuri E46 M3 intake creates a smooth airflow path from the filter through the MAF sensor while retaining factory ECU compatibility and everyday drivability.\u003c\/p\u003e\n\n\u003cp\u003eAt the center of the system is Eventuri's pre-preg carbon fiber Venturi housing. Unlike an exposed cone filter surrounded by a conventional heat shield, the patented housing controls the transition from the filter into the intake tract, helping reduce turbulence and maintain a more consistent airflow path toward the MAF sensor. This approach is particularly important on the S54, where stable airflow through the MAF is critical to maintaining predictable engine operation.\u003c\/p\u003e\n\n\u003cp\u003eEventuri conducted extensive dyno testing, road validation, and intake temperature monitoring throughout development. Testing demonstrated gains of approximately 10-15 horsepower and 8-12 ft-lb of torque, with improvements through the mid-range and upper rev range. The intake is designed to work with the factory ECU calibration and original MAF sensor, providing increased airflow without compromising the drivability expected from the E46 M3.\u003c\/p\u003e\n\n\u003cp\u003eCold-air delivery is supported by a dedicated pre-preg carbon fiber air scoop that directs ambient air toward the intake. Multi-piece aluminum heat shields with neoprene insulation help separate the intake from surrounding engine-bay heat, supporting more stable intake air temperatures during demanding driving conditions.\u003c\/p\u003e\n\n\u003cp\u003eA CNC-machined MAF tube provides precise integration with the factory sensor, while an anodized aluminum inlet cowling, high-flow performance filter, premium silicone coupler, and BMW-spec hose clamps complete the system. Each component is designed to function as part of a coordinated induction path rather than as an isolated intake component.\u003c\/p\u003e\n\n\u003cp\u003eDesigned and hand-assembled in the United Kingdom, the Eventuri BMW E46 M3 Carbon Intake combines measurable S54 performance gains with pre-preg carbon construction and a more pronounced induction note, creating an intake system developed specifically around the airflow requirements and character of BMW's naturally aspirated S54 engine.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned specifically for the BMW E46 M3 with S54 engine\u003c\/li\u003e\n  \u003cli\u003ePatented pre-preg carbon fiber Venturi intake housing\u003c\/li\u003e\n  \u003cli\u003eDyno-proven gains of approximately 10-15 horsepower\u003c\/li\u003e\n  \u003cli\u003eDyno-proven gains of approximately 8-12 ft-lb of torque\u003c\/li\u003e\n  \u003cli\u003eDesigned to improve airflow efficiency and throttle response\u003c\/li\u003e\n  \u003cli\u003eMore pronounced S54 induction sound\u003c\/li\u003e\n  \u003cli\u003eCompatible with the factory ECU calibration\u003c\/li\u003e\n  \u003cli\u003eCNC-machined MAF tube for factory sensor integration\u003c\/li\u003e\n  \u003cli\u003eHigh-flow performance air filter\u003c\/li\u003e\n  \u003cli\u003ePre-preg carbon fiber cold-air scoop with aluminum collar\u003c\/li\u003e\n  \u003cli\u003eAnodized aluminum inlet cowling\u003c\/li\u003e\n  \u003cli\u003eMulti-piece aluminum heat shields with neoprene insulation\u003c\/li\u003e\n  \u003cli\u003ePremium silicone coupler with BMW-spec hose clamps\u003c\/li\u003e\n  \u003cli\u003eDesigned to maintain stable intake air temperatures\u003c\/li\u003e\n  \u003cli\u003eReplacement filter: (1) EVE-661-G2-FTR Eventuri Carbon Intake System Replacement Filter - Type B\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-e46-m3-hybrid-carbon-airbox-with-intake\"\u003eEventuri BMW E46 M3 Hybrid Carbon Airbox with Intake\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-replacement-air-filter-type-b\"\u003eEventuri Carbon Intake System Replacement Filter - Type B\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178922274970,"sku":"EVE-E46-CF-INT","price":1070.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-bmw-e46-m3-carbon-intake-white-background.jpg?v=1794444796"},{"product_id":"eventuri-bmw-e9x-m3-s65-black-carbon-airbox-lid-gloss","title":"Eventuri BMW E9X M3 (S65) Black Carbon Airbox Lid - Gloss","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e BMW E9X M3 S65 Black Carbon Airbox Lid - Gloss is a direct replacement for the factory airbox lid, developed to enhance the appearance and induction character of BMW's high-revving S65 V8. Rather than replacing an already highly developed factory intake system, Eventuri refined the upper airbox with a pre-preg carbon fiber component designed specifically for the E90, E92 and E93 M3.\u003c\/p\u003e\n\n\u003cp\u003eThe factory E9X M3 airbox is an integral part of the S65 induction system, so Eventuri took a measured approach. The original lower airbox and intake architecture remain in place while the plastic upper lid is replaced in carbon.\u003c\/p\u003e\n\n\u003cp\u003eThe lid features a 2x2 twill weave beneath a deep gloss clear coat and is designed to retain the factory airbox geometry and original intake architecture. The carbon fiber construction provides a more pronounced S65 induction character. The gloss finish is the more striking of the two and complements other Eventuri S65 components, including the carbon intake system, carbon inlet plenum and carbon duct set.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is designed around the original BMW airbox and uses the factory mounting locations and hardware, with no modification to the surrounding intake system required.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-bmw-e9x-m3-s65-black-carbon-airbox-lid-matte\"\u003eMatte carbon fiber finish\u003c\/a\u003e is also available.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for BMW E90, E92 and E93 M3 models with the S65 V8 engine\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory plastic airbox lid\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fiber construction\u003c\/li\u003e\n\u003cli\u003e2x2 twill carbon fiber weave\u003c\/li\u003e\n\u003cli\u003eDeep gloss clear-coated finish\u003c\/li\u003e\n\u003cli\u003eDesigned to retain the factory airbox geometry and original intake architecture\u003c\/li\u003e\n\u003cli\u003eProvides a more pronounced S65 induction character\u003c\/li\u003e\n\u003cli\u003eUtilizes factory BMW mounting locations and hardware, with no permanent modification required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-e9x-m3-carbon-fiber-intake-system\"\u003eEventuri BMW E9X M3 (S65) Black Carbon Intake System - Gloss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-e9x-m3-carbon-inlet-plenum\"\u003eEventuri BMW E9X M3 (S65) Black Carbon Inlet Plenum - Gloss\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-bmw-e9x-m3-carbon-duct-set-gloss\"\u003eEventuri BMW E9X M3 Carbon Duct Set - Gloss\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178923487386,"sku":"EVE-E9X-CF-ARB","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-e9x-m3-s65-gloss-carbon-airbox-lid-2.jpg?v=1794444851"},{"product_id":"eventuri-fk8-civic-type-r-black-carbon-intake-system-v2","title":"Eventuri FK8 Civic Type-R Black Carbon Intake System - V2","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Black Carbon Intake System V2 for the Honda FK8 Civic Type R was developed through extensive dyno validation and airflow analysis to achieve two primary objectives: maintain low intake air temperatures and significantly de-restrict the turbo inlet path. The result is one of the most effective and thoroughly engineered intake solutions available for the K20C1-powered FK8 platform.\u003c\/p\u003e\n\u003cp\u003ePositioned directly behind the radiator, the factory intake location makes heat management critical. Eventuri addresses this by fully enclosing the filter within a sealed pre-preg carbon fiber airbox which utilizes the factory hood seal to isolate the intake from engine bay heat. This design helps maintain stable and lower intake air temperatures under load, preventing the power loss commonly associated with exposed cone filter setups.\u003c\/p\u003e\n\u003cp\u003eTo improve airflow efficiency, the restrictive flexible factory tubing has been eliminated and replaced with a carbon Venturi stack connected directly to the filter. This optimized inlet geometry promotes smoother, more laminar airflow into the turbocharger, reducing resistance and improving spool characteristics. The system also incorporates a secondary inlet scoop which draws additional air from the inner wing area, nearly doubling the effective cross-sectional area compared to the single-entry factory system.\u003c\/p\u003e\n\u003cp\u003eThe V2 revision includes an updated MAF housing for improved signal stability and calibration consistency. Independent testing has demonstrated gains of approximately 14–20 horsepower and 22–29 lb-ft of torque, with V-Box data showing a 60–130mph acceleration improvement of 1.2 seconds. On the road, the intake delivers sharper throttle response, stronger mid-range pull, and a more pronounced turbo induction sound.\u003c\/p\u003e\n\u003cp\u003eConstructed from high-quality pre-preg carbon fiber and supported by laser-cut bracketry and OEM-specification hardware, the Eventuri FK8 intake system combines measurable performance gains with a premium engine bay aesthetic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered specifically for the Honda FK8 Civic Type R (K20C1)\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fiber sealed airbox enclosure to maintain low intake temperatures\u003c\/li\u003e\n\u003cli\u003eCustom ISO-tested high-flow air filter\u003c\/li\u003e\n\u003cli\u003eCarbon Venturi stack with integrated MAF tube\u003c\/li\u003e\n\u003cli\u003eUpdated V2 MAF housing for improved calibration stability\u003c\/li\u003e\n\u003cli\u003eSecondary inlet scoop increases available airflow area\u003c\/li\u003e\n\u003cli\u003eRedesigned inlet path eliminates restrictive factory tubing\u003c\/li\u003e\n\u003cli\u003eIndependent performance gains of approximately 14–20hp and 22–29 lb-ft\u003c\/li\u003e\n\u003cli\u003eV-Box acceleration improvement: 60–130mph reduced by 1.2 seconds\u003c\/li\u003e\n\u003cli\u003eHigh-quality silicone coupler with OEM-specification hose clamps\u003c\/li\u003e\n\u003cli\u003eLaser-cut mounting bracketry included\u003c\/li\u003e\n\u003cli\u003eOEM-level fitment with factory mounting compatibility\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178923585690,"sku":"EVE-FK8-CF-INT","price":1545.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/Eventuri-FK8-Civic-Type-R-Black-Carbon-Intake-V2-Main.jpg?v=1794444852"},{"product_id":"eventuri-audi-b9-s4-s5-black-carbon-intake-system","title":"Eventuri Audi B9 S4 \/ S5 Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Black Carbon Intake System for the Audi B9 S4 and S5 was engineered to deliver measurable performance gains while maintaining low inlet air temperatures in a heat-sensitive engine bay. Rather than adopting an open cone layout which would increase airflow at the expense of thermal efficiency, Eventuri completely re-developed the intake tract from the turbo inlet to the front grille with a sealed carbon fiber system designed to optimize both flow and temperature control.\u003c\/p\u003e\n\u003cp\u003eAt the core of the system is the patented Eventuri carbon fiber Venturi housing which allows the airflow to transition smoothly from the filter to the turbo inlet. By eliminating the restrictive factory airbox and the convoluted plastic inlet pipe, and replacing them with a one-piece carbon Venturi housing and rigid intake tube, turbulence is reduced and airflow velocity is maintained as it enters the turbocharger. The result is improved throttle response, stronger mid-range performance, and consistent power delivery even in heat-soaked conditions.\u003c\/p\u003e\n\u003cp\u003eThe intake also features a carbon fiber front scoop and intake duct which channel ambient air directly into the sealed housing. This ensures the system benefits from a continuous supply of cold air while shielding it from engine bay heat. The combination of controlled airflow, thermal efficiency, and reduced restriction has produced independent performance gains of 13-17hp and 15-20ft-lb of torque, along with a verified reduction in 60-130mph acceleration times by 0.5 seconds.\u003c\/p\u003e\n\u003cp\u003eEvery component in the Eventuri system is developed for a specific function and manufactured to OEM-level fitment standards, resulting in an intake which not only performs at the highest level for the B9 platform but also enhances the engine bay with a premium carbon fiber finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerformance gain: 13-17hp and 15-20ft-lb torque\u003c\/li\u003e\n\u003cli\u003e60-130mph acceleration reduced by 0.5 seconds (independently tested)\u003c\/li\u003e\n\u003cli\u003ePatented carbon fiber Venturi filter housing with integrated intake tube\u003c\/li\u003e\n\u003cli\u003ePre-preg black carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eCarbon fiber intake duct for sealed cold air feed\u003c\/li\u003e\n\u003cli\u003eCarbon fiber front scoop for direct airflow from the grille\u003c\/li\u003e\n\u003cli\u003eHigh-flow Generation 2 air filter\u003c\/li\u003e\n\u003cli\u003eRigid intake tube for smoother airflow and reduced turbulence\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel bracketry for secure OEM mounting points\u003c\/li\u003e\n\u003cli\u003eCNC machined mounting stubs\u003c\/li\u003e\n\u003cli\u003eHigh-quality silicone couplers with OEM-spec hose clamps\u003c\/li\u003e\n\u003cli\u003eReplacement air filter: Eventuri Type B – EVE-661-G2-FTR\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178923618458,"sku":"EVE-B9S5-CF-INT","price":1550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/43427880285_833219f11f_b.jpg?v=1794444851"},{"product_id":"eventuri-f5x-mini-cooper-s-carbon-intake","title":"Eventuri F5X Mini Cooper S Carbon Intake","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e F56 MINI Cooper S Carbon Intake System is a complete high-performance induction upgrade engineered for the turbocharged 2.0L B48 engine found across the F5X MINI platform. Developed using Eventuri's complete-system approach, the intake combines a sealed carbon fiber filter housing, dedicated cold-air feed, and optimized MAF tube to increase airflow while controlling intake temperatures and maintaining factory drivability.\u003c\/p\u003e\n\n\u003cp\u003eAt the center of the system is Eventuri's patented carbon fiber Venturi filter housing. Rather than using a conventional cone filter with a basic heat shield, the housing creates a smooth transition from the filter into the intake tract to help reduce turbulence and maintain airflow velocity toward the turbocharger. The sealed architecture also isolates the filter from hot engine bay air, helping maintain a consistent supply of cooler, denser intake air.\u003c\/p\u003e\n\n\u003cp\u003eA dedicated carbon fiber bonnet scoop works with the sealed housing to direct ambient air into the intake system. This approach increases the available cold-air supply while reducing heat soak, particularly during repeated acceleration and higher-load driving where underhood temperatures can rise significantly.\u003c\/p\u003e\n\n\u003cp\u003eEventuri also incorporates a CNC-machined MAF tube designed to maintain accurate sensor readings while providing a smooth airflow transition through the intake tract. Increased internal volume and reduced restriction allow the turbocharger to draw air more efficiently than through the factory intake system, supporting improved throttle response and measurable performance gains.\u003c\/p\u003e\n\n\u003cp\u003eEventuri reports gains of approximately 8-15 horsepower and 15-25 ft-lb of torque for the Cooper S, while Cooper JCW applications have demonstrated gains of approximately 15-27 horsepower and 20-26 ft-lb of torque. V-Box testing on the Cooper S also recorded a 0.6-second reduction in 60-130 mph acceleration time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConfirm your MAF tube style with photo #2 prior to selecting vehicle type.\u003c\/strong\u003e Eventuri offers configurations for different F5X MINI applications, making it important to visually verify the MAF tube fitted to your vehicle before ordering.\u003c\/p\u003e\n\n\u003cp\u003eManufactured from premium pre-preg carbon fiber and engineered for precise integration with the F5X engine bay, the Eventuri MINI intake combines increased airflow capacity, thermal management, and Eventuri's distinctive carbon construction into a complete induction system for Cooper S and JCW applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for compatible F5X MINI Cooper S and JCW models with the 2.0L B48 engine\u003c\/li\u003e\n  \u003cli\u003eCompatible with applicable Pre-LCI and LCI configurations\u003c\/li\u003e\n  \u003cli\u003ePatented Eventuri carbon fiber Venturi filter housing\u003c\/li\u003e\n  \u003cli\u003eSealed intake architecture designed to minimize heat soak\u003c\/li\u003e\n  \u003cli\u003eCarbon fiber bonnet scoop directs ambient air into the intake system\u003c\/li\u003e\n  \u003cli\u003eCNC-machined MAF tube provides accurate sensor integration and a smooth airflow transition\u003c\/li\u003e\n  \u003cli\u003eIncreased internal intake volume reduces restriction ahead of the turbocharger\u003c\/li\u003e\n  \u003cli\u003ePremium pre-preg carbon fiber construction\u003c\/li\u003e\n  \u003cli\u003eDesigned for precise OEM-level integration within the F5X engine bay\u003c\/li\u003e\n  \u003cli\u003eCooper S performance increase: approximately 8-15 hp and 15-25 ft-lb\u003c\/li\u003e\n  \u003cli\u003eCooper JCW performance increase: approximately 15-27 hp and 20-26 ft-lb\u003c\/li\u003e\n  \u003cli\u003eCooper S V-Box testing: 60-130 mph acceleration reduced by approximately 0.6 seconds\u003c\/li\u003e\n  \u003cli\u003eReplacement filter: (1) EVE-151-G2-FTR Eventuri Carbon Intake System Replacement Filter - Type S\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-f56-mini-cooper-s-plastic-intake-with-carbon-scoop\"\u003eEventuri F56 MINI Cooper S Plastic Intake with Carbon Scoop\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Pre LCI","offer_id":68178923683994,"sku":"EVE-F56-CF-INT","price":1715.0,"currency_code":"USD","in_stock":true},{"title":"LCI","offer_id":68178923716762,"sku":"EVE-F56-LCI-CF-INT","price":1715.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-f56-mini-cooper-s-carbon-intake-system.jpg?v=1794444851"},{"product_id":"eventuri-audi-b9-rs4-rs5-black-carbon-intake-system","title":"Eventuri Audi B9 RS4 \/ RS5 Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Audi B9 RS4 \/ RS5 Black Carbon Intake System is engineered to reduce intake restriction while maintaining a controlled supply of ambient air to the 2.9-liter twin-turbocharged V6. Replacing the factory airbox and convoluted inlet connection, the system incorporates a pre-preg carbon fiber Venturi filter housing with an integrated intake tube, a sealed carbon air duct, and dedicated front and secondary carbon ducts. Eventuri reports independently measured gains of 11–16 wheel horsepower and 12–17 lb-ft of torque at the wheels on an otherwise stock Audi B9 RS5.\u003c\/p\u003e\n\n\u003cp\u003eThe factory RS4 and RS5 intake arrangement incorporates a flexible, convoluted inlet section between the airbox and turbocharger intake tube. Eventuri replaces this transition with a rigid carbon fiber housing and integrated tube that extends directly to the factory turbo inlet connection. The internal geometry gradually reduces the cross-sectional area from the reverse-mounted Generation 2 filter toward the outlet, providing a continuous airflow transition without the abrupt changes in section associated with the original ducting.\u003c\/p\u003e\n\n\u003cp\u003eAt the center of the system is Eventuri's Venturi filter housing, which surrounds a bespoke reverse-mounted dry air filter. The housing profile is designed to distribute incoming air around the filter and guide it through a progressively narrowing passage toward the turbocharger inlet. This geometry is intended to reduce flow separation and turbulence while providing a consistent airflow path through the intake assembly.\u003c\/p\u003e\n\n\u003cp\u003eManaging intake air temperature is particularly important in the B9 RS4 and RS5 engine compartment, where the turbochargers and associated exhaust components generate substantial heat. Eventuri addresses this with a sealed carbon fiber intake duct that receives ambient air from the front grille region. Flexible rubber sealing edges interface with the filter housing and factory air entry location, helping separate the incoming air supply from the surrounding engine compartment.\u003c\/p\u003e\n\n\u003cp\u003eThe carbon intake duct also incorporates a secondary opening positioned toward a cooler region of the engine compartment. This additional entry provides another source of incoming air while the primary front scoop directs airflow from the grille toward the main duct. The front scoop features a continuous bend radius designed to guide incoming air into the duct opening with minimal abrupt directional changes.\u003c\/p\u003e\n\n\u003cp\u003eThe Venturi housing and integrated inlet tube are mounted to the engine, allowing the assembly to move with the powertrain under acceleration. A flexible sealing interface between the housing and stationary carbon duct accommodates this movement while maintaining the intended separation between the cold-air supply and engine compartment.\u003c\/p\u003e\n\n\u003cp\u003eAll primary intake housings and ducts are manufactured from pre-preg carbon fiber with a high-gloss black finish. Application-specific laser-cut stainless steel brackets and CNC-machined mounting stubs interface with the factory rubber airbox mounts, while silicone couplers and OEM-specification hose clamps complete the intake connections.\u003c\/p\u003e\n\n\u003cp\u003eIndependent back-to-back dynamometer testing on an otherwise stock Audi B9 RS5 recorded gains of 11–16 horsepower and 12–17 lb-ft of torque at the wheels. Testing was performed on the same day with the hood closed and intake temperatures monitored to maintain consistent conditions. Eventuri attributes these improvements to the combined effects of the revised airflow geometry, reduced intake restriction, and controlled cold-air supply.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Audi B9 RS4 Avant, RS5 Coupe, and RS5 Sportback applications\u003c\/li\u003e\n\u003cli\u003ePre-preg black carbon fiber construction with high-gloss finish\u003c\/li\u003e\n\u003cli\u003eEventuri Venturi filter housing with integrated rigid intake tube\u003c\/li\u003e\n\u003cli\u003eReverse-mounted high-flow Generation 2 dry air filter\u003c\/li\u003e\n\u003cli\u003eGradually reducing internal housing geometry designed to minimize airflow restriction\u003c\/li\u003e\n\u003cli\u003eEliminates the convoluted factory inlet connection between the airbox and turbocharger intake tube\u003c\/li\u003e\n\u003cli\u003eSealed carbon fiber primary intake duct with flexible rubber sealing interfaces\u003c\/li\u003e\n\u003cli\u003eCarbon fiber front air scoop with continuous-radius airflow transition\u003c\/li\u003e\n\u003cli\u003eCarbon fiber secondary duct connecting the primary duct to the factory front air entry region\u003c\/li\u003e\n\u003cli\u003eAdditional air entry opening positioned toward a cooler region of the engine compartment\u003c\/li\u003e\n\u003cli\u003eEngine-mounted filter housing designed to accommodate powertrain movement\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel mounting brackets\u003c\/li\u003e\n\u003cli\u003eCNC-machined mounting stubs utilizing factory rubber airbox mounts\u003c\/li\u003e\n\u003cli\u003eHigh-quality silicone couplers and OEM-specification hose clamps\u003c\/li\u003e\n\u003cli\u003eIndependent dyno results: 11–16 wheel horsepower and 12–17 lb-ft of torque at the wheels\u003c\/li\u003e\n\u003cli\u003eReplacement filter: Eventuri Type B Generation 2, EVE-661-G2-FTR\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: EVE-B9RS5-CF-INT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178923782298,"sku":"EVE-B9RS5-CF-INT","price":1750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/EventuriAudiB9RS4_RS5BlackCarbonIntakeSystem_4e1b56aa-4dee-4729-b135-e09eba685fe6.jpg?v=1794444851"},{"product_id":"eventuri-bmw-f90-m5-f9x-m8-black-carbon-intake-system-v2","title":"Eventuri BMW F90 M5 \/ F9X M8 Black Carbon Intake System - V2","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e BMW F90 M5 \/ F9X M8 Black Carbon Intake System – V2 is a high-performance induction upgrade engineered specifically for BMW’s twin-turbo S63 V8 platform. Developed through extensive real-world testing and advanced airflow simulation, this system delivers consistent performance gains while maintaining low intake air temperatures across all driving conditions.\u003c\/p\u003e\n\u003cp\u003eUnlike open-element designs, the Eventuri intake features sealed carbon fiber filter housings that isolate the intake charge from engine bay heat. Precision-designed shrouds, forward-facing air scoops, and integrated heat shields work together to supply a continuous flow of cool, ambient air, minimizing heat soak during low-speed and stop-and-go driving.\u003c\/p\u003e\n\u003cp\u003eLarge front air scoops feed fresh air directly into the intake system, while gold heat-reflective shields with integrated airflow guides efficiently channel incoming air toward the filters. This design allows the system to maintain unrestricted airflow at speed while keeping intake air temperatures stable.\u003c\/p\u003e\n\u003cp\u003eTo further improve efficiency, the inlet tubes have been redesigned with over a 30% increase in cross-sectional area compared to the factory intake, even through the tight strut brace openings. Reduced restriction allows the turbochargers to operate more efficiently, lowering wastegate duty cycles and improving throttle response.\u003c\/p\u003e\n\u003cp\u003eDesigned and hand-assembled in the UK, the Eventuri V2 intake offers a refined OEM-plus solution for both daily-driven vehicles and high-performance builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits BMW \u003ca href=\"https:\/\/ind-distribution.com\/collections\/m5-f90\"\u003eF90 M5\u003c\/a\u003e and \u003ca href=\"https:\/\/ind-distribution.com\/collections\/m8-f91-f92\"\u003eF9X M8 models\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSealed gloss carbon fiber filter housings\u003c\/li\u003e\n\u003cli\u003eHigh-flow bespoke filter elements\u003c\/li\u003e\n\u003cli\u003eForward-facing air scoops with integrated airflow guides\u003c\/li\u003e\n\u003cli\u003eGold heat-reflective shielding\u003c\/li\u003e\n\u003cli\u003eEnlarged inlet tubes for improved airflow efficiency\u003c\/li\u003e\n\u003cli\u003eDesigned and hand-assembled in the UK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178923749530,"sku":"EVE-F9XM5M8-CF-INT","price":2345.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/48061421846_2a07aa359f_b.jpg?v=1794444852"},{"product_id":"eventuri-carbon-intake-system-replacement-filter-type-s","title":"Eventuri Carbon Intake System Replacement Filter - Type S","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Carbon Intake System Replacement Filter – Type S is engineered to restore the airflow, filtration efficiency, and performance of compatible Eventuri intake systems. Designed specifically for Eventuri's patented reverse-mounted filter architecture, this genuine replacement filter maintains the airflow characteristics and filtration performance originally engineered into the intake system.\u003c\/p\u003e\n\u003cp\u003eConstructed using a dry non-woven filtration media, the Type S filter has been tested to ISO 5011 filtration standards while remaining completely safe for mass airflow (MAF) sensors. Unlike oiled filters, the dry design requires no maintenance oil, eliminating the possibility of sensor contamination while providing consistent airflow throughout its service life.\u003c\/p\u003e\n\u003cp\u003eA defining feature of the Type S filter is its dual-cone architecture. The internal cone distributes incoming air evenly across the entire filtration surface, while the precision-machined external cone guides airflow toward the center of the intake. Together, these features promote smooth airflow, reduce turbulence, and maximize the effectiveness of Eventuri's patented Venturi housing design.\u003c\/p\u003e\n\u003cp\u003eWhether replacing a filter during scheduled maintenance or keeping a spare available between service intervals, the Eventuri Type S Replacement Filter ensures your intake system continues to perform exactly as intended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Eventuri replacement air filter\u003c\/li\u003e\n\u003cli\u003eDry non-woven filtration media\u003c\/li\u003e\n\u003cli\u003eISO 5011 tested to OEM filtration standards\u003c\/li\u003e\n\u003cli\u003eSafe for MAF sensors — no oil required\u003c\/li\u003e\n\u003cli\u003eDual-cone design for optimized airflow distribution\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for compatible Eventuri intake systems\u003c\/li\u003e\n\u003cli\u003eIncludes one replacement filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-air-filter-cleaning-kit\"\u003eEventuri Air Filter Cleaning Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178923880602,"sku":"EVE-151-G2-FTR","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-replacement-air-filter-type-s-white-background.jpg?v=1794444852"},{"product_id":"eventuri-bmw-f-chassis-n55-replacement-panel-filter-oem-intake-only","title":"Eventuri BMW F-Chassis N55 Replacement Panel Filter - OEM Intake Only","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e replacement panel filter for BMW F-chassis N55 applications is a direct performance upgrade for the factory airbox, developed using the same CFD-driven design and testing methodology as Eventuri’s full intake systems. Designed to increase airflow while maintaining OEM fitment and thermal efficiency, this drop-in filter provides an immediate improvement in intake response without altering the factory intake layout.\u003c\/p\u003e\n\u003cp\u003eThe filtration medium is engineered to deliver a higher flow rate than the stock paper element while maintaining effective filtration and stable intake air temperatures. By reducing pressure drop across the air filter, the turbocharger is able to operate more efficiently, resulting in sharper throttle response and improved consistency under load.\u003c\/p\u003e\n\u003cp\u003eThis panel filter installs directly into the original airbox and retains the sealed cold-air design of the factory system, making it an ideal upgrade for customers who want improved performance while preserving OEM drivability, appearance, and emissions equipment.\u003c\/p\u003e\n\u003cp\u003eThis product is for the OEM intake system only and is not compatible with Eventuri carbon intake systems.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement performance panel filter for OEM airbox\u003c\/li\u003e\n\u003cli\u003eIncreased airflow compared to factory paper filter\u003c\/li\u003e\n\u003cli\u003eMaintains factory sealed intake design\u003c\/li\u003e\n\u003cli\u003eReduces pressure drop to improve turbo efficiency\u003c\/li\u003e\n\u003cli\u003eImproved throttle response and intake consistency\u003c\/li\u003e\n\u003cli\u003ePrecision fit for factory air filter housing\u003c\/li\u003e\n\u003cli\u003eDeveloped using CFD analysis and dyno validation\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications required\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178923946138,"sku":"EVE-N55-PF","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri_n55_panel_filter_f87_m2_1_ed50f219-9e01-44c4-bd98-6ec591ad2613.jpg?v=1794444857"},{"product_id":"eventuri-bmw-e39-m5-black-carbon-intake-system","title":"Eventuri BMW E39 M5 Black Carbon Intake System","description":"\n\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Black Carbon Intake System for the BMW E39 M5 is engineered to improve airflow efficiency and cold-air delivery to the naturally aspirated S62 5.0-liter V8. Developed to operate with the factory ECU calibration and mass airflow (MAF) sensors, the system replaces the original airboxes with dual carbon fiber Venturi housings and dedicated front-mounted cold-air ducts. Eventuri reports performance gains of 8–12 hp and 8–10 lb-ft of torque.\u003c\/p\u003e\n\n\u003cp\u003eThe factory E39 M5 airboxes use rectangular chambers with airflow transitions into circular MAF tubes. Eventuri's intake replaces these chambers with reverse-mounted high-flow filters enclosed within carbon fiber housings. Each housing incorporates an aluminum inlet cowl and a tapered internal profile designed to provide a more efficient transition from the filter to the factory MAF tube.\u003c\/p\u003e\n\n\u003cp\u003eA distinguishing feature of the E39 M5 system is its dedicated cold-air delivery architecture. Replacement front fog lamp surrounds incorporate integrated air inlets connected to flexible neoprene ducting, directing ambient air toward the intake assemblies. Laser-cut aluminum shields help separate the filter areas from surrounding engine bay heat.\u003c\/p\u003e\n\n\u003cp\u003eThe system is manufactured using pre-preg carbon fiber housings and includes application-specific mounting brackets, silicone couplers, and BMW-specification hose clamps. Eventuri developed and tested the intake on a vehicle retaining its factory ECU calibration and exhaust, with back-to-back dyno comparisons performed under consistent conditions.\u003c\/p\u003e\n\n\u003cp\u003eFor owners looking to further refine the S62 engine bay, the intake can be paired with the \u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-bmw-e39-m5-e52-z8-s62-black-carbon-plenum-lid\"\u003eEventuri BMW E39 M5 \/ E52 Z8 S62 Black Carbon Plenum Lid\u003c\/a\u003e, available separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for the BMW E39 M5 with the naturally aspirated S62 V8 engine\u003c\/li\u003e\n  \u003cli\u003eManufacturer-reported gains of 8–12 hp and 8–10 lb-ft of torque\u003c\/li\u003e\n  \u003cli\u003eDual pre-preg carbon fiber Venturi intake housings\u003c\/li\u003e\n  \u003cli\u003eTwo bespoke Generation 2 high-flow air filters\u003c\/li\u003e\n  \u003cli\u003eReverse-mounted filter configuration with tapered airflow transitions\u003c\/li\u003e\n  \u003cli\u003eAluminum inlet cowls integrated into each housing assembly\u003c\/li\u003e\n  \u003cli\u003eReplacement front fog lamp surrounds with integrated cold-air ducts\u003c\/li\u003e\n  \u003cli\u003eFlexible neoprene ducting directs ambient air toward the intake assemblies\u003c\/li\u003e\n  \u003cli\u003eLaser-cut aluminum heat shields and application-specific mounting brackets\u003c\/li\u003e\n  \u003cli\u003eRetains factory MAF sensors and compatibility with the original ECU calibration\u003c\/li\u003e\n  \u003cli\u003eIncludes silicone couplers and BMW-specification hose clamps\u003c\/li\u003e\n  \u003cli\u003eEventuri manufacturer part number: EVE-E39-INT\u003c\/li\u003e\n\u003cli\u003eReplacement filters: (2) Eventuri Type B (EVE-661-G2-FTR)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178923978906,"sku":"EVE-E39-CF-INT","price":1395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-e39-m5-carbon-intake-kit-components.jpg?v=1794444857"},{"product_id":"eventuri-porsche-991-1-991-2-turbo-turbo-s-black-carbon-intake-system","title":"Eventuri Porsche 991.1 \/ 991.2 Turbo \/ Turbo S Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Black Carbon Intake System for the Porsche 991 Turbo and Turbo S was developed through extensive real-world testing to improve turbocharger efficiency while maintaining stable intake air temperatures within the tightly packaged rear-engine bay. By replacing the factory airbox with dual patented Venturi filter housings, the system enables smoother airflow to each turbocharger, reducing aerodynamic drag and allowing the turbos to generate boost more efficiently.\u003c\/p\u003e\n\u003cp\u003eWith reduced wastegate duty cycles and earlier peak boost, the intake delivers sharper throttle response and measurable performance improvements across the rev range. The dual-filter configuration also provides a significantly larger filtration surface area compared to the single factory panel filter, supporting higher airflow capacity without compromising filtration quality.\u003c\/p\u003e\n\u003cp\u003eThermal management is critical in the 911 Turbo platform, where engine bay density can quickly elevate intake air temperatures. Eventuri addresses this with a fully sealed carbon fiber intake duct that draws ambient air from the factory location while preventing heated engine bay air from entering the system. The duct seals against the underside of the boot lid using the OEM rubber cushion and extends down to mate precisely with the filter housings.\u003c\/p\u003e\n\u003cp\u003eManufactured from 100% pre-preg carbon fiber, the complex geometry of the duct has been carefully engineered to navigate surrounding engine components while maintaining the smoothest possible airflow transition from the single air entry point to the dual filter housings. Integrated drain tubes direct water safely away from the filters while maintaining airflow priority from the primary inlet.\u003c\/p\u003e\n\u003cp\u003eSupporting the system are laser-cut stainless steel brackets, powder coated for durability and designed to utilize factory mounting locations for OEM-level fitment. Strategically shaped cutouts reduce weight while preserving structural rigidity, ensuring the intake remains securely positioned even under high-performance driving conditions.\u003c\/p\u003e\n\u003cp\u003eThe result is a complete intake solution that enhances turbo efficiency, improves airflow dynamics, and delivers a more pronounced induction character without sacrificing refinement. Road testing with a VBOX recorded a 0.2 second reduction in 60–130mph acceleration, reinforcing the performance capability of this meticulously engineered upgrade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered for Porsche 991.1 and 991.2 Turbo \/ Turbo S models\u003c\/li\u003e\n\u003cli\u003eDual patented pre-preg carbon fiber Venturi filter housings\u003c\/li\u003e\n\u003cli\u003eGeneration 2 bespoke high-flow air filters\u003c\/li\u003e\n\u003cli\u003eFully sealed carbon fiber intake duct minimizes heat soak\u003c\/li\u003e\n\u003cli\u003eDraws ambient air from the factory location\u003c\/li\u003e\n\u003cli\u003eSmooth airflow transition improves turbo efficiency\u003c\/li\u003e\n\u003cli\u003eReduces wastegate duty cycles and supports earlier peak boost\u003c\/li\u003e\n\u003cli\u003eIntegrated drain tubes channel water safely away from filters\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel mounting brackets with powder-coated finish\u003c\/li\u003e\n\u003cli\u003eOEM-level fitment utilizing factory mounting points\u003c\/li\u003e\n\u003cli\u003eCompatible with the IPD Y-Pipe\u003c\/li\u003e\n\u003cli\u003eAcceleration improvement: 60–130mph reduced by approximately 0.2 seconds\u003c\/li\u003e\n\u003cli\u003eDesigned and hand-assembled in the UK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178924241050,"sku":"EVE-P991T-INT","price":2450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/46679542795_185908047d_k.jpg?v=1794444857"},{"product_id":"eventuri-bmw-f87-m2-competition-m2-cs-s55-black-carbon-intake-system","title":"Eventuri BMW F87 M2 Competition \/ M2 CS S55 Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Black Carbon Intake System for the BMW F87 M2 Competition and M2 CS has been engineered to improve turbocharger efficiency by delivering a smoother, less restrictive airflow path while maintaining low intake temperatures. Designed specifically for the S55 engine, this system combines Eventuri’s patented technology with precision carbon construction to create an intake solution that enhances both performance and engine bay aesthetics.\u003c\/p\u003e\n\u003cp\u003eReplacing the restrictive factory airbox with Eventuri’s patented carbon fiber Venturi filter housings allows airflow to remain laminar as it travels toward the turbo inlets. By reducing turbulence and drag, the turbos are able to spool more efficiently, resulting in improved throttle response and stronger power delivery throughout the rev range.\u003c\/p\u003e\n\u003cp\u003eBecause the M2 Competition has no air openings behind the grilles, the system incorporates sealed carbon intake ducts which fit over the factory cold-air channels and shield incoming air from engine bay heat. Maintaining lower intake air temperatures is critical for turbocharged engines, ensuring denser air reaches the combustion chamber for more consistent performance during both daily driving and spirited use.\u003c\/p\u003e\n\u003cp\u003eComplementing the Venturi housings are organically shaped carbon fiber inlet tubes designed to provide a continuous and optimized path from the filters to the turbos. Integrated aluminum cowls promote smoother airflow entry, while bespoke Generation 2 high-flow filters offer increased filtration surface area without compromising engine protection.\u003c\/p\u003e\n\u003cp\u003eThe result is a highly engineered intake system capable of producing performance gains of approximately 12–20 horsepower and 12–16 ft-lb of torque, while delivering a more pronounced induction sound. Constructed from pre-preg carbon fiber and finished to Eventuri’s exacting standards, this intake provides a premium OEM+ upgrade for the S55-powered M2 platform.\u003c\/p\u003e\n\u003cp\u003eTo complete the intake tract, the \u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-f8x-s55-carbon-charge-pipe-set\"\u003eEventuri S55 Carbon Charge Pipe Set\u003c\/a\u003e carries the same construction through to the throttle body, and the \u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-f8x-m3-m4-carbon-fiber-engine-cover\"\u003eEventuri S55 Carbon Engine Cover\u003c\/a\u003e is the optional cover shown in several of the photos on this page.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSKU: EVE-M2C-CF-INT\u003c\/li\u003e\n\u003cli\u003eFits BMW F87 M2 Competition and M2 CS with the S55 engine\u003c\/li\u003e\n\u003cli\u003ePatented carbon fiber Venturi housings promote smooth, laminar airflow\u003c\/li\u003e\n\u003cli\u003eSealed carbon ducts help minimize heat soak and maintain low inlet temperatures\u003c\/li\u003e\n\u003cli\u003eOrganically shaped carbon inlet tubes reduce turbulence and restriction\u003c\/li\u003e\n\u003cli\u003eIntegrated aluminum cowls optimize airflow entry\u003c\/li\u003e\n\u003cli\u003eBespoke Generation 2 high-flow air filters with increased surface area\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel mounting brackets for secure installation\u003c\/li\u003e\n\u003cli\u003eHigh-quality silicone couplers with BMW-specification hose clamps\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fiber construction for strength, reduced weight, and premium finish\u003c\/li\u003e\n\u003cli\u003ePerformance gains of approximately 12–20 hp and 12–16 ft-lb of torque\u003c\/li\u003e\n\u003cli\u003eDesigned and hand-assembled in the UK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178924208282,"sku":"EVE-M2C-CF-INT","price":2245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-f87-m2-competition-s55-carbon-intake-white.jpg?v=1794444857"},{"product_id":"eventuri-bmw-e9x-m3-s65-black-carbon-inlet-plenum-gloss","title":"Eventuri BMW E9X M3 (S65) Black Carbon Inlet Plenum - Gloss","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e BMW E9X M3 (S65) Black Carbon Inlet Plenum – Gloss is a precision-engineered upgrade developed for one of BMW M's most celebrated naturally aspirated engines. Designed specifically for the 4.0L S65 V8, the carbon plenum replaces the factory plastic assembly with a motorsport-grade alternative that enhances induction sound while significantly elevating the appearance of the engine bay.\u003c\/p\u003e\n\n\u003cp\u003eConstructed entirely from pre-preg carbon fiber, including the internal velocity stacks, the Eventuri plenum preserves the carefully engineered internal volume and runner geometry established by BMW. Rather than pursuing marginal peak horsepower gains, Eventuri focused on maintaining the S65's throttle response, linear power delivery, and drivability while unlocking a richer, more aggressive induction sound.\u003c\/p\u003e\n\n\u003cp\u003eExtensive acoustic development allowed Eventuri to optimize the carbon fiber wall thickness and resonance characteristics of the plenum. As engine speed rises, the intake note builds into a sharper, more exotic soundtrack reminiscent of the E46 M3 CSL, creating a more engaging driving experience throughout the rev range.\u003c\/p\u003e\n\n\u003cp\u003eDesigned to integrate seamlessly with both the factory intake system and upgraded carbon intake components, the plenum offers precise fitment through CNC-machined aluminum mounting flanges and integrated sensor provisions. The high-gloss carbon fiber finish transforms the appearance of the engine bay while replacing the aging factory plastic plenum with a centerpiece worthy of BMW's final naturally aspirated V8 M engine.\u003c\/p\u003e\n\n\u003cp\u003eFor enthusiasts looking to retain an OEM-inspired appearance, an optional Genuine BMW OE S65 \/\/\/M V8 emblem is available. When selected, the emblem is professionally installed before shipping to ensure precise alignment and a clean factory-quality presentation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eFull pre-preg carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eHigh-gloss carbon fiber finish\u003c\/li\u003e\n\u003cli\u003eMaintains factory plenum volume and internal velocity stack geometry\u003c\/li\u003e\n\u003cli\u003eEngineered to enhance induction sound while preserving factory drivability\u003c\/li\u003e\n\u003cli\u003eCarbon fiber velocity stacks manufactured to factory specifications\u003c\/li\u003e\n\u003cli\u003ePrecision CNC-machined aluminum mounting flanges\u003c\/li\u003e\n\u003cli\u003eIntegrated CNC-machined temperature sensor boss\u003c\/li\u003e\n\u003cli\u003eIntegrated CNC-machined breather boss\u003c\/li\u003e\n\u003cli\u003eCompatible with factory and upgraded intake systems\u003c\/li\u003e\n\u003cli\u003eOptional Genuine BMW OE S65 \/\/\/M V8 emblem professionally pre-installed\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-bmw-e9x-m3-s65-black-carbon-inlet-plenum-matte\"\u003eEventuri BMW E9X M3 (S65) Black Carbon Inlet Plenum – Matte\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178926043290,"sku":"EVE-E9X-CF-PLM","price":2465.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-e9x-m3-s65-carbon-inlet-plenum-gloss-white-background.jpg?v=1794444914"},{"product_id":"eventuri-audi-8v-rs3-8y-non-us-8s-ttrs-lhd-carbon-turbo-inlet","title":"Eventuri Audi 8V RS3 \/ 8Y Non-US \/ 8S TTRS - LHD Carbon Turbo Inlet","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Audi 8V RS3 \/ 8Y Non-US \/ 8S TTRS LHD Carbon Turbo Inlet is engineered to reduce airflow restriction and thermal transfer between the intake system and turbocharger on Audi's 2.5-liter turbocharged five-cylinder platform. Manufactured from high-temperature pre-preg carbon fiber, the inlet incorporates increased internal volume, a continuous airflow transition, and a thermally isolated turbocharger connection. This left-hand-drive configuration is designed for compatible Audi 8V RS3, non-U.S. 8Y RS3, 8S TTRS, and F3 RSQ3 applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong style=\"color: #c00000;\"\u003eImportant: This inlet is not compatible with U.S.-spec left-hand-drive Audi 8Y RS3 models.\u003c\/strong\u003e North American 8Y RS3 vehicles use a different breather arrangement and require the corresponding U.S.-market Eventuri turbo inlet configuration.\u003c\/p\u003e\n\n\u003cp\u003eThe factory turbo inlet measures approximately 72mm at the intake connection and narrows to 56.4mm at the turbocharger outlet. Eventuri increases these dimensions to 103mm and 74mm, respectively, creating a substantially larger internal cross-sectional area. The carbon elbow incorporates a continuous curvature between the intake connection and turbo flange, reducing abrupt changes in airflow direction and minimizing restrictions associated with the original inlet geometry.\u003c\/p\u003e\n\n\u003cp\u003eThe inlet is manufactured from high-temperature pre-preg carbon fiber with a nominal 2mm wall thickness and a smooth internal surface. Its construction provides lower through-thickness thermal conductivity than conventional cast-metal inlet designs, helping reduce conductive heat transfer into the intake tract. A heat-reflective layer is applied where the elbow crosses the exhaust manifold to provide additional protection against radiant heat.\u003c\/p\u003e\n\n\u003cp\u003eThermal isolation is further supported by a CNC-machined, anodized aluminum turbo flange and an oil-resistant silicone coupler incorporating an internal spacer. The spacer separates the carbon elbow from direct contact with the metal turbocharger flange, reducing heat conduction into the inlet assembly. The carbon elbow is finished in raw carbon without a clear coat to accommodate the elevated temperatures surrounding the turbocharger and exhaust manifold.\u003c\/p\u003e\n\n\u003cp\u003eEventuri evaluated the inlet using a SuperFlow SF-1020 flow bench under controlled back-to-back conditions. The manufacturer reports a 42% increase in maximum airflow compared with the factory inlet when using the stock turbo flange, increasing to as much as 58% with the larger GTX flange in the tested left-hand-drive configuration. These results demonstrate the effect of the revised inlet geometry and flange selection on maximum airflow capacity.\u003c\/p\u003e\n\n\u003cp\u003eIndependent dynamometer testing by BR Performance Netherlands evaluated the Eventuri turbo inlet on an Audi TTRS equipped with a TTE700 hybrid turbocharger. With the Eventuri Stage 3 intake already installed, replacing the modified factory turbo inlet with the Eventuri carbon inlet increased measured output from 606.5 hp to 620.8 hp, a gain of 14.3 hp under the reported test conditions. Results depend on turbocharger configuration, calibration, and supporting modifications.\u003c\/p\u003e\n\n\u003cp\u003eThe inlet is designed to integrate with the \u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-audi-8v-rs3-8s-ttrs-carbon-stage-3-intake-system\"\u003eEventuri Audi 8V RS3 \/ 8S TTRS Carbon Stage 3 Intake System\u003c\/a\u003e, available separately. For a coordinated engine bay finish, the \u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-audi-8y-8v-rs3-8s-ttrs-black-carbon-and-red-kevlar-engine-cover\"\u003eEventuri Audi 8Y \/ 8V RS3 \/ 8S TTRS Black Carbon and Red Kevlar Engine Cover\u003c\/a\u003e is also available separately.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTurbo Flange Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA compatible turbo flange is required for installation.\u003c\/strong\u003e The carbon inlet cannot be installed without the appropriate flange. Select the correct option from the product dropdown based on the turbocharger installed on your vehicle.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStock \/ Factory Turbo:\u003c\/strong\u003e EVE-TRB8V8S-LHD-STK\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTTE625 \/ TTE700 Hybrid Turbo:\u003c\/strong\u003e EVE-TRB8V8S-LHD-TTE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSRM GTX Turbo:\u003c\/strong\u003e EVE-TRB8V8S-LHD-SRM\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for compatible left-hand-drive Audi 8V RS3, non-U.S. 8Y RS3, 8S TTRS, and F3 RSQ3 applications\u003c\/li\u003e\n  \u003cli\u003eHigh-temperature pre-preg carbon fiber turbo inlet elbow\u003c\/li\u003e\n  \u003cli\u003e103mm intake-side diameter compared with 72mm for the factory inlet\u003c\/li\u003e\n  \u003cli\u003e74mm outlet diameter compared with 56.4mm for the factory inlet\u003c\/li\u003e\n  \u003cli\u003eContinuous internal curvature designed to reduce airflow restriction\u003c\/li\u003e\n  \u003cli\u003e42% increase in maximum measured airflow with the stock turbo flange\u003c\/li\u003e\n  \u003cli\u003eUp to 58% increase in maximum measured airflow with the larger GTX flange in the tested LHD configuration\u003c\/li\u003e\n  \u003cli\u003eIndependently dyno tested on a TTE700-equipped Audi TTRS by BR Performance Netherlands\u003c\/li\u003e\n  \u003cli\u003eNominal 2mm carbon fiber wall thickness\u003c\/li\u003e\n  \u003cli\u003eHeat-reflective protection where the inlet crosses the exhaust manifold\u003c\/li\u003e\n  \u003cli\u003eOil-resistant silicone coupler with integrated thermal spacer\u003c\/li\u003e\n  \u003cli\u003eCNC-machined, anodized aluminum turbo flange selected through the product dropdown\u003c\/li\u003e\n  \u003cli\u003eMarine-grade stainless steel hose clamps\u003c\/li\u003e\n  \u003cli\u003eRaw carbon fiber finish without clear coat\u003c\/li\u003e\n  \u003cli\u003eCompatible turbo flange required for installation\u003c\/li\u003e\n  \u003cli\u003eNot compatible with U.S.-spec Audi 8Y RS3 models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Stock Turbo (EVE-TRB8V8S-FLG-STK)","offer_id":68178926076058,"sku":"EVE-TRB8V8S-LHD-STK","price":745.0,"currency_code":"USD","in_stock":true},{"title":"TTE700\/625 Turbo (EVE-TRB8V8S-FLG-TTE)","offer_id":68178926108826,"sku":"EVE-TRB8V8S-LHD-TTE","price":745.0,"currency_code":"USD","in_stock":true},{"title":"SRM GTX Turbo (EVE-TRB8V8S-FLG-SRM)","offer_id":68178926141594,"sku":"EVE-TRB8V8S-LHD-SRM","price":745.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/Eventuri_Audi_8V_RS3_Gen_2_-_LHD_Carbon_Turbo_Inlet_9.jpg?v=1794444915"},{"product_id":"eventuri-toyota-a90-supra-black-carbon-headlamp-race-duct","title":"Eventuri Toyota A90 Supra Black Carbon Headlamp Race Duct","description":"\u003cp\u003eDeveloped for drivers pushing the Toyota A90 Supra beyond street performance limits, the \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Carbon Headlamp Race Duct delivers a true RAM-air cold feed designed to maximize airflow to the intake system or turbocharger. Engineered with track use in mind, this system replaces one factory headlamp to create the most direct path possible for high-pressure ambient air to enter the engine bay.\u003c\/p\u003e\n\u003cp\u003eAs the MKV Supra continues to establish itself as a formidable drag and circuit platform, managing intake temperatures becomes critical for maintaining consistent performance. By forcing cold air directly toward the intake tract, the headlamp duct helps reduce heat soak and supports repeatable power delivery during successive high-load runs.\u003c\/p\u003e\n\u003cp\u003eThe duct follows the OEM headlamp profile for a seamless exterior appearance while integrating dual internal carbon air guides. One guide feeds the factory air channel, while the second directs airflow across the airbox area to maximize cooling efficiency. When paired with the Eventuri Supra intake system, a removable panel on the intake duct allows the filter to be fully exposed to the incoming airflow for maximum effect.\u003c\/p\u003e\n\u003cp\u003eConstructed from high-quality pre-preg carbon fiber, the duct provides exceptional structural rigidity while remaining lightweight. Laser-cut stainless steel brackets secure the assembly to factory mounting points, ensuring stability even at elevated speeds.\u003c\/p\u003e\n\u003cp\u003eFor dedicated track builds seeking the most aggressive cold air solution available, the Eventuri Headlamp Race Duct provides a measurable advantage in airflow efficiency while introducing an unmistakably motorsport-focused aesthetic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered specifically for the Toyota A90 \/ A91 Supra\u003c\/li\u003e\n\u003cli\u003eCreates a true RAM-air cold feed directly into the engine bay\u003c\/li\u003e\n\u003cli\u003eReplaces one OEM headlamp for maximum airflow\u003c\/li\u003e\n\u003cli\u003eDual internal carbon air guides optimize air distribution\u003c\/li\u003e\n\u003cli\u003eEnhances cooling efficiency and helps reduce heat soak\u003c\/li\u003e\n\u003cli\u003eCompatible with the Eventuri intake system for maximum airflow exposure\u003c\/li\u003e\n\u003cli\u003eConstructed from pre-preg carbon fiber for strength and rigidity\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel brackets utilize factory mounting locations\u003c\/li\u003e\n\u003cli\u003eLightweight motorsport-inspired construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178927419546,"sku":"EVE-A90-CF-HDP","price":925.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/Eventuri_A90_Supra_Carbon_Headlamp_Duct_10.jpg?v=1794444978"},{"product_id":"eventuri-f5x-mini-cooper-s-plastic-intake-carbon-scoop","title":"Eventuri F5X Mini Cooper S Plastic Intake + Carbon Scoop","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e F56 MINI Cooper S Plastic Intake + Carbon Scoop delivers the engineering principles of Eventuri's flagship intake systems in a more accessible package. Combining a high-quality composite airbox with a genuine pre-preg carbon fiber hood scoop, this intake provides improved airflow, lower intake temperatures, and enhanced throttle response while maintaining OEM-level drivability.\u003c\/p\u003e\n\n\u003cp\u003eDeveloped around Eventuri's \"Complete System\" philosophy, the intake is fully sealed to prevent the turbocharger from drawing hot air from the engine bay. Fresh ambient air is directed through the included carbon fiber hood scoop into enlarged internal airflow passages, helping reduce heat soak and maintain consistent intake temperatures during spirited driving and higher-output applications.\u003c\/p\u003e\n\n\u003cp\u003eAt the core of the system is Eventuri's patented Venturi filter housing, engineered to provide a smooth, low-turbulence airflow path into the turbocharger. The factory MAF sensor is retained in a CNC-machined MAF tube, and Eventuri confirms that the sensor operates within OEM parameters.\u003c\/p\u003e\n\n\u003cp\u003eUnlike open-element intake systems, the sealed architecture maintains stable intake temperatures across varying operating conditions. The result is a complete intake solution that combines performance, consistency, and OEM-quality integration.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePerformance Gains\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eMINI Cooper S: 8-15 HP \/ 15-25 lb-ft\u003c\/li\u003e\n\u003cli\u003eMINI John Cooper Works: 15-27 HP \/ 20-26 lb-ft*\u003c\/li\u003e\n\u003cli\u003eV-Box Testing (Cooper S): 60-130 mph reduced by 0.6 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e \u003cstrong\u003eVerify your factory MAF tube style against product photo #2 before selecting your vehicle variant.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eFits MINI F56 Cooper S and select John Cooper Works models\u003c\/li\u003e\n\u003cli\u003eComposite sealed airbox with genuine pre-preg carbon fiber hood scoop\u003c\/li\u003e\n\u003cli\u003ePatented Eventuri Venturi filter housing\u003c\/li\u003e\n\u003cli\u003eCNC-machined MAF tube for precise airflow measurement\u003c\/li\u003e\n\u003cli\u003eSealed intake design reduces heat soak and intake temperatures\u003c\/li\u003e\n\u003cli\u003eImproves throttle response and mid-range performance\u003c\/li\u003e\n\u003cli\u003eMaintains OEM-level drivability and fitment\u003c\/li\u003e\n\u003cli\u003eEngineered as a complete intake system\u003c\/li\u003e\n\u003cli\u003eReplacement filter: (1) Eventuri Type S (EVE-151-G2-FTR)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-f56-mini-cooper-s-carbon-intake-system\"\u003eEventuri F56 MINI Cooper S Carbon Intake System\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Pre-LCI","offer_id":68178927452314,"sku":"EVE-F56-PL-INT","price":1095.0,"currency_code":"USD","in_stock":true},{"title":"LCI","offer_id":68178927485082,"sku":"EVE-F56-LCI-PL-INT","price":1095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-f56-mini-cooper-s-plastic-intake-carbon-scoop-white-background.jpg?v=1794444977"},{"product_id":"eventuri-carbon-intake-system-replacement-filter-e9x-m3-s65-type-e","title":"Eventuri Carbon Intake System Replacement Filter - E9X M3 (S65) - Type E","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Type E Replacement Filter is a genuine service component designed specifically for the Eventuri Carbon Intake System on the BMW E9X M3. Engineered to maintain the original airflow characteristics and filtration efficiency of the intake, this filter ensures the system continues to perform exactly as intended.\u003c\/p\u003e\n\u003cp\u003eUnlike generic cone filters, Eventuri’s proprietary design is optimized for their patented reverse-mounted configuration. The double-layer dry filtration medium is constructed from non-woven mesh and tested to ISO 5011 standards, delivering OEM-level filtration while supporting the high airflow demands of the naturally aspirated S65 V8.\u003c\/p\u003e\n\u003cp\u003eIntegrated into the filter are two carefully developed flow-directing cones. The internal cone promotes an even velocity profile across the filtration surface, helping to disperse incoming air smoothly and reduce turbulence. The externally CNC-machined cone features a unique profile which accelerates airflow toward the intake tubing, increasing convergence speed and maintaining a high-velocity air stream to the engine.\u003c\/p\u003e\n\u003cp\u003eThis replacement filter is supplied with the bonded mounting bracket, which is transferred from the original filter using the pre-applied 3M attachment method. Once installed, the filter restores the intake system to its optimal operating condition with no modification required.\u003c\/p\u003e\n\u003cp\u003eFor E9X M3 owners running the Eventuri intake system in either gloss or matte carbon, the Type E filter provides a direct-fit service solution to preserve performance, sound, and filtration quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Eventuri replacement filter – Type E\u003c\/li\u003e\n\u003cli\u003eEngineered exclusively for the Eventuri E9X M3 intake system\u003c\/li\u003e\n\u003cli\u003eDouble-layer non-woven dry filtration media\u003c\/li\u003e\n\u003cli\u003eISO 5011 tested for OEM-level filtration performance\u003c\/li\u003e\n\u003cli\u003eOptimized for patented reverse-mounted filter configuration\u003c\/li\u003e\n\u003cli\u003eInternal cone promotes even airflow velocity\u003c\/li\u003e\n\u003cli\u003eCNC-machined external cone increases airflow convergence speed\u003c\/li\u003e\n\u003cli\u003eDry filter eliminates risk of MAF sensor contamination\u003c\/li\u003e\n\u003cli\u003eDirect replacement with no modification required\u003c\/li\u003e\n\u003cli\u003ePrice includes one filter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178927386778,"sku":"EVE-991-FTR","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/45881767884_5f942c3e34_k.jpg?v=1794444977"},{"product_id":"eventuri-f60-mini-cooper-countryman-s-jcw-plastic-intake-system","title":"Eventuri F60 Mini Cooper Countryman S \/ JCW Plastic Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e intake system for the MINI F60 Countryman S and JCW follows the same “complete system” design philosophy as the carbon range, providing a sealed high-volume intake solution engineered to reduce heat soak and improve turbo efficiency. By increasing the internal volume of the duct and maintaining a direct feed from the factory cold air location above the radiator, the system ensures that only ambient air is supplied to the turbocharger.\u003c\/p\u003e\n\u003cp\u003eAt the core of the intake is Eventuri’s patented filter housing, which controls the airflow path to maintain smooth and laminar conditions as air transitions into the CNC-machined MAF tube. This reduces turbulence and restriction compared to the factory airbox, allowing for improved throttle response and a more efficient turbocharger operation.\u003c\/p\u003e\n\u003cp\u003eThe sealed design prevents the intake from drawing hot engine bay air during repeated acceleration and high-load driving, resulting in more stable intake air temperatures and consistent performance — particularly important for higher output B48-powered MINI applications.\u003c\/p\u003e\n\u003cp\u003eThis system uses a high-quality composite construction and does not feature the hood scoop configuration found on the F56 version, as the F60 platform is optimized around the factory front air feed location.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eComplete sealed intake system\u003c\/li\u003e\n\u003cli\u003eHigh-volume intake duct with increased internal capacity\u003c\/li\u003e\n\u003cli\u003ePatented Eventuri filter housing for laminar airflow\u003c\/li\u003e\n\u003cli\u003eCNC-machined MAF tube for smooth turbo entry\u003c\/li\u003e\n\u003cli\u003eDraws cold air from the factory location above the radiator\u003c\/li\u003e\n\u003cli\u003eReduces heat soak and stabilizes intake air temperatures\u003c\/li\u003e\n\u003cli\u003eImproved throttle response and turbo efficiency\u003c\/li\u003e\n\u003cli\u003eHigh-quality composite construction\u003c\/li\u003e\n\u003cli\u003eDoes not include hood scoop design\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReplacement filter: (1) Eventuri Type S (EVE-151-G2-FTR)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eInstalled images shown are of the F56 intake system and are for reference only\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"F60 Pre-LCI Cooper Countryman","offer_id":68178927681690,"sku":"EVE-F60-PL-INT","price":795.0,"currency_code":"USD","in_stock":true},{"title":"F60 LCI Cooper Countryman","offer_id":68178927714458,"sku":"EVE-F60-LCI-PL-INT","price":795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/52051794842_196de24847_b.jpg?v=1794444977"},{"product_id":"eventuri-audi-8v-gen-2-rs3-8s-ttrs-black-carbon-stage-3-intake-system","title":"Eventuri Audi 8V Gen 2 RS3 \/ 8S TTRS Black Carbon Stage 3 Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Black Carbon Stage 3 Intake System for the Audi 8V Gen 2 RS3 and 8S TTRS has been engineered to support extreme power levels while maintaining low intake air temperatures and uncompromised airflow efficiency. Developed for high-performance and hybrid turbo applications, this system delivers the flow capacity required for builds exceeding 1000whp while retaining OEM-level fitment and drivability.\u003c\/p\u003e\n\u003cp\u003eAt the core of the system is Eventuri’s patented carbon fiber Venturi filter housing, maximized in internal volume to suit the confined RS3 engine bay. The housing works in conjunction with a bespoke 210mm outer diameter high-flow dry filter, providing over 130,000mm² of filtration surface area. This combination promotes laminar airflow into the 103mm internal diameter intake tube, creating a smooth, restriction-free path to the turbocharger.\u003c\/p\u003e\n\u003cp\u003eThe intake tube maintains a consistent 103mm internal diameter with optimized curvature from the filter housing to the turbo inlet, allowing the turbo to operate with reduced drag and improved efficiency. The sealed carbon inlet duct draws ambient air from the factory slam panel location while also introducing an additional high-pressure feed from beneath the hood, effectively adding the equivalent of a 7-inch secondary air entry.\u003c\/p\u003e\n\u003cp\u003eConstructed entirely from 100% pre-preg carbon fiber with no fiberglass, the system achieves a smooth internal surface to further enhance airflow quality. A dedicated heat shield with gold reflective backing protects the intake from radiant engine heat, ensuring stable intake temperatures even under sustained high-load conditions.\u003c\/p\u003e\n\u003cp\u003eFlow bench testing demonstrates the capability of the system, increasing airflow from 530 CFM with the factory intake to 840 CFM at 28\" H2O. Independent performance testing shows gains of 15–18hp and 19–23 lb-ft on stock turbo vehicles, with hybrid turbo applications realizing increases of 25–30hp and 20–24 lb-ft.\u003c\/p\u003e\n\u003cp\u003eEvery component is designed to function as part of a complete system, providing the turbocharger with the highest possible airflow while maintaining thermal efficiency for consistent, repeatable performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered for Audi 8V Gen 2 RS3 and Audi 8S TTRS including OPF (DWNA) models\u003c\/li\u003e\n\u003cli\u003ePatented pre-preg carbon fiber Venturi filter housing with 103mm outlet\u003c\/li\u003e\n\u003cli\u003eBespoke 210mm high-flow dry cone filter with over 130,000mm² filtration area\u003c\/li\u003e\n\u003cli\u003eCarbon fiber intake tube with 103mm internal diameter\u003c\/li\u003e\n\u003cli\u003eSealed carbon inlet duct with dual cold-air feeds\u003c\/li\u003e\n\u003cli\u003eDedicated heat shield with gold reflective backing\u003c\/li\u003e\n\u003cli\u003eOPF breather adapter and silicone breather hose included\u003c\/li\u003e\n\u003cli\u003eHigh-quality silicone couplers and reducer\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel mounting brackets\u003c\/li\u003e\n\u003cli\u003eCompatible with OE and APR throttle bodies\u003c\/li\u003e\n\u003cli\u003eFlow bench tested: 840 CFM vs 530 CFM stock\u003c\/li\u003e\n\u003cli\u003ePerformance gain (stock turbo): 15–18hp and 19–23 lb-ft\u003c\/li\u003e\n\u003cli\u003ePerformance gain (hybrid turbo): 25–30hp and 20–24 lb-ft\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178927878298,"sku":"EVE-ST38V8S-CF-INT","price":1895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/Eventuri_Audi_8V_RS3_Gen_2_Carbon_Intake_-_Stage_3_16.jpg?v=1794444978"},{"product_id":"eventuri-carbon-intake-system-replacement-filter-type-d","title":"Eventuri Carbon Intake System Replacement Filter - Type D","description":"\u003cp\u003eMaintain the performance and filtration efficiency of your \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e intake system with the Eventuri Type D Replacement Filter. Engineered specifically for Eventuri’s patented reverse-mounted filter housings, this filter preserves the carefully optimized airflow characteristics that define the Eventuri intake architecture.\u003c\/p\u003e\n\u003cp\u003eUnlike generic cone filters used by many intake manufacturers, Eventuri’s proprietary design is the result of extensive research, development, and aerodynamic modeling. The double-layer dry filtration medium is constructed from non-woven mesh and tested to ISO 5011 standards, delivering OEM-level filtration while supporting the high airflow demands of performance engines.\u003c\/p\u003e\n\u003cp\u003eAt the core of the filter are two precisely engineered flow-directing cones. The internal cone promotes even velocity distribution across the filtration surface, helping to disperse airflow smoothly while minimizing turbulence. The externally CNC-machined cone features a unique profile developed to guide airflow toward the center of the filter and transition efficiently into the downstream intake tubing.\u003c\/p\u003e\n\u003cp\u003eThis controlled airflow behavior increases convergence speed and improves velocity entering the intake system, allowing the engine to operate more efficiently without compromising filtration quality. The dry construction also eliminates the risk of oil contamination to sensitive MAF sensors.\u003c\/p\u003e\n\u003cp\u003eWhether replacing a worn filter or keeping a spare on hand for routine maintenance cycles, the Eventuri Type D filter ensures your intake system continues to perform exactly as engineered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Eventuri replacement filter – Type D\u003c\/li\u003e\n\u003cli\u003eDesigned for patented reverse-mounted Eventuri filter housings\u003c\/li\u003e\n\u003cli\u003eDouble-layer non-woven dry filtration media\u003c\/li\u003e\n\u003cli\u003eISO 5011 tested for OEM-level filtration performance\u003c\/li\u003e\n\u003cli\u003eInternal cone promotes even airflow velocity\u003c\/li\u003e\n\u003cli\u003eCNC-machined external cone optimizes airflow convergence\u003c\/li\u003e\n\u003cli\u003eDry filter eliminates risk of MAF sensor contamination\u003c\/li\u003e\n\u003cli\u003eSupports consistent intake performance and airflow efficiency\u003c\/li\u003e\n\u003cli\u003eDirect replacement with no modification required\u003c\/li\u003e\n\u003cli\u003ePrice includes one filter\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178927845530,"sku":"EVE-W210-FTR","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/48992443212_108e70326f_k_1.jpg?v=1794444977"},{"product_id":"eventuri-fk8-fl5-civic-type-r-carbon-kevlar-engine-cover","title":"Eventuri FK8 \/ FL5 Civic Type-R Carbon Kevlar Engine Cover","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e FK8 \/ FL5 Civic Type R Carbon Kevlar Engine Cover is a direct replacement for the factory plastic cover, designed to elevate the visual centerpiece of the K20C1 engine bay with motorsport-derived materials and OEM-level fitment. Constructed from pre-preg gloss black carbon fiber with a red Kevlar center section, this component delivers a high-contrast performance aesthetic while maintaining the practicality of the original mounting system.\u003c\/p\u003e\n\u003cp\u003eWith the engine bay on the FK8, FL5, and FK2 platforms clearly visible when the hood is opened, the engine cover plays a key role in the overall presentation. Eventuri’s composite construction replaces the standard plastic unit with a lightweight, heat-resistant solution that matches the material quality and craftsmanship found throughout their carbon intake systems.\u003c\/p\u003e\n\u003cp\u003eThe gloss carbon outer sections provide a deep, high-clarity finish, while the red Kevlar center creates a distinctive visual signature synonymous with the Type R platform. Installation is a simple direct replacement using the factory mounting points, allowing for a refined upgrade without permanent modification.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the engine cover only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement for the factory engine cover\u003c\/li\u003e\n\u003cli\u003ePre-preg gloss black carbon fiber outer sections\u003c\/li\u003e\n\u003cli\u003eRed Kevlar center section\u003c\/li\u003e\n\u003cli\u003eHigh-gloss UV-resistant clear coat\u003c\/li\u003e\n\u003cli\u003eLightweight and heat-resistant composite construction\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM mounting locations for simple installation\u003c\/li\u003e\n\u003cli\u003eEnhances engine bay appearance with a motorsport-inspired finish\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003cli\u003eSKU: EVE-FK8FK2-ENG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHonda Civic Type R FL5\u003c\/li\u003e\n\u003cli\u003eHonda Civic Type R FK8\u003c\/li\u003e\n\u003cli\u003eHonda Civic Type R FK2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178927911066,"sku":"EVE-FK8FK2-ENG","price":575.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/49946746196_d9d9f169f7_k.jpg?v=1794444977"},{"product_id":"eventuri-toyota-a90-supra-g29-z4-m40i-b58-black-carbon-intake-system","title":"Eventuri Toyota A90 Supra \/ G29 Z4 M40i (B58) Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Toyota A90 Supra \/ BMW G29 Z4 M40i Black Carbon Intake System is a complete high-flow induction upgrade engineered specifically for the turbocharged B58 engine. Designed to increase airflow capacity while controlling intake air temperatures, the system combines a sealed pre-preg carbon fiber airbox, dual cold-air feeds, an oversized carbon inlet tube, and a bespoke high-flow filter into a coordinated intake package.\u003c\/p\u003e\n\n\u003cp\u003eThermal management is particularly important on the B58 platform due to the intake system's proximity to the exhaust side of the engine bay. Elevated temperatures reduce air density and can increase the work required from the turbocharger to achieve target boost. Eventuri addresses this with a fully sealed carbon fiber airbox that isolates the filter from surrounding engine-bay heat while providing substantially greater internal volume than the factory intake assembly.\u003c\/p\u003e\n\n\u003cp\u003eDuring development, Eventuri identified an additional source of ambient air near the wheel arch and incorporated it into the airbox as a secondary cold-air feed. This dual-feed configuration increases the volume of outside air available to the filter while retaining the thermal advantages of an enclosed intake system. A dedicated heat shield with gold reflective backing provides an additional barrier against radiant heat from the exhaust side of the engine bay.\u003c\/p\u003e\n\n\u003cp\u003eBeyond the airbox, Eventuri replaces the restrictive factory intake tube with a smooth, high-volume pre-preg carbon fiber inlet. The tube begins with a substantial 111mm internal diameter before gradually tapering toward the turbo inlet, creating a controlled transition designed to reduce turbulence and restriction as airflow demand increases.\u003c\/p\u003e\n\n\u003cp\u003eA bespoke high-flow dry cone filter provides a larger filtration surface area than the factory filter while retaining ISO-tested filtration performance. CNC-machined temperature sensor and breather mounts provide precise integration with the factory B58 components, while laser-cut stainless steel brackets, a silicone coupler, and OEM-specification clamps complete the installation.\u003c\/p\u003e\n\n\u003cp\u003eBy addressing airflow capacity and thermal management as a complete system, the Eventuri A90 Supra \/ G29 Z4 M40i Carbon Intake provides the B58 turbocharger with a less restrictive supply of ambient air while adding a more pronounced induction sound and a substantial pre-preg carbon fiber presence within the engine bay.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for the Toyota A90 Supra and BMW G29 Z4 M40i with B58 engine\u003c\/li\u003e\n  \u003cli\u003eComplete high-flow induction system developed specifically for the B58 platform\u003c\/li\u003e\n  \u003cli\u003eFully sealed pre-preg carbon fiber airbox\u003c\/li\u003e\n  \u003cli\u003eDual cold-air feed design\u003c\/li\u003e\n  \u003cli\u003eSecondary ambient air feed positioned near the wheel arch\u003c\/li\u003e\n  \u003cli\u003eDesigned to isolate the filter from surrounding engine-bay heat\u003c\/li\u003e\n  \u003cli\u003eDedicated heat shield with gold reflective backing\u003c\/li\u003e\n  \u003cli\u003eHigh-volume pre-preg carbon fiber intake tube\u003c\/li\u003e\n  \u003cli\u003e111mm internal diameter at the intake tube opening\u003c\/li\u003e\n  \u003cli\u003eGradually tapered inlet geometry toward the turbocharger\u003c\/li\u003e\n  \u003cli\u003eDesigned to reduce intake restriction and airflow turbulence\u003c\/li\u003e\n  \u003cli\u003eBespoke high-flow dry cone air filter\u003c\/li\u003e\n  \u003cli\u003eISO-tested filtration performance\u003c\/li\u003e\n  \u003cli\u003eCNC-machined temperature sensor mount\u003c\/li\u003e\n  \u003cli\u003eCNC-machined breather adapter\u003c\/li\u003e\n  \u003cli\u003eLaser-cut stainless steel mounting brackets\u003c\/li\u003e\n  \u003cli\u003eSilicone coupler with OEM-specification clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eRelated Products\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-a90-supra-carbon-engine-cover\"\u003eEventuri Toyota A90 Supra Carbon Engine Cover\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-a90-supra-carbon-headlamp-duct\"\u003eEventuri Toyota A90 Supra Carbon Headlamp Duct\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/ind-distribution.com\/products\/eventuri-carbon-intake-system-replacement-filter-type-l\"\u003eEventuri Carbon Intake System Replacement Filter - Type L\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178928140442,"sku":"EVE-A90-CF-INT","price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-a90-supra-g29-z4-b58-carbon-intake-system-white.jpg?v=1794444978"},{"product_id":"eventuri-mercedes-w205-c63-c63s-amg-black-carbon-intake-system-v2","title":"Eventuri Mercedes W205 C63 \/ C63S AMG Black Carbon Intake System - V2","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Mercedes-Benz W205 C63 \/ C63S AMG Black Carbon Intake System – V2 is engineered to increase airflow capacity and reduce intake restriction on the M177 4.0-liter twin-turbocharged V8. Replacing the factory airboxes with enlarged, fully sealed pre-preg carbon fiber assemblies, the system incorporates bespoke high-flow panel filters, revised internal airflow geometry, and carbon fiber front intake ducts. Eventuri reports gains of 10–12 hp on factory-standard vehicles and 22–30 hp on Stage 2 applications under its documented test conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe factory C63 intake system is constrained by the limited space available between the panel filters and turbocharger inlet connections. In certain sections, the original upper airbox provides only 23mm of internal height above the filter. Eventuri increases this clearance to 56mm, creating a substantially larger airflow passage toward the turbochargers. The redesigned airboxes also relocate the MAP sensor mounting positions toward the rear of the upper housings, allowing more of the available internal volume to be used for airflow.\u003c\/p\u003e\n\n\u003cp\u003eThe lower airbox sections are similarly redesigned to improve airflow entry from the factory cold-air supply. Eventuri replaces the restrictive convoluted inlet geometry with a smoother transition, increasing the inlet passage height from approximately 43mm to 74mm. The resulting lower airbox inlet provides approximately 84% greater cross-sectional area than the factory configuration, helping reduce restriction before air reaches the filter elements.\u003c\/p\u003e\n\n\u003cp\u003eEach airbox incorporates a custom rounded panel filter manufactured with a double-layer, ISO 5011-tested dry filtration medium. The curved filter profile eliminates the sharp corners associated with conventional rectangular panel filters, allowing the carbon housings to maintain a more gradual internal transition. CNC-machined, black-anodized aluminum filter flanges provide accurately controlled sealing surfaces between the filters and carbon airbox assemblies.\u003c\/p\u003e\n\n\u003cp\u003eEventuri evaluated the complete intake system using a SuperFlow SF-1020 flow bench at a pressure differential of 28 inches H2O. Under controlled testing, the factory airboxes measured an average of 381 CFM per airbox, compared with 531 CFM for the Eventuri system. This represents approximately 39% greater measured maximum airflow capacity. The sealed construction retains the factory cold-air entry locations, helping limit exposure to the elevated temperatures generated by the closely positioned turbochargers and exhaust manifolds.\u003c\/p\u003e\n\n\u003cp\u003ePerformance testing was conducted on both factory-standard and Stage 2 C63S vehicles. Eventuri reports gains of 10–12 hp and 12–15 lb-ft on stock applications, increasing to 22–30 hp and 20–24 lb-ft on Stage 2 vehicles equipped with downpipes and an ECU calibration. Back-to-back dynamometer testing was performed with the hood closed, with the intake system changed while the other vehicle modifications remained consistent. Eventuri also reports independent road-dynamometer testing by CF Dynamics on a Stage 1 vehicle, recording gains of 31 hp and 39 Nm under the documented conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe V2 intake incorporates pre-preg carbon fiber front ducts that transition from the original oval-shaped slam-panel openings into the enlarged airbox assemblies. Custom EPDM couplers, CNC-machined MAP sensor bosses, aluminum filter flanges, and laser-cut stainless steel mounting brackets complete the installation hardware. The system is designed to retain the original rubber mounting bushes while providing application-specific mounting interfaces.\u003c\/p\u003e\n\n\u003cp\u003eThis listing is configured for vehicles equipped with factory turbochargers. For applications using larger aftermarket turbochargers, Eventuri offers a separate special-order intake configuration with larger 3-inch outlet connections. Customers requiring the upgraded-turbo version should contact IND Distribution before ordering.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Mercedes-Benz W205, S205, C205, and A205 C63 \/ C63S AMG models equipped with the M177 V8\u003c\/li\u003e\n\u003cli\u003eV2 intake configuration for factory turbocharger applications\u003c\/li\u003e\n\u003cli\u003eFully sealed pre-preg carbon fiber airbox assemblies\u003c\/li\u003e\n\u003cli\u003eTwo enlarged carbon fiber airbox lids with integrated turbo inlet transitions\u003c\/li\u003e\n\u003cli\u003eTwo carbon fiber lower airbox sections with revised inlet geometry\u003c\/li\u003e\n\u003cli\u003eTwo pre-preg carbon fiber front intake ducts\u003c\/li\u003e\n\u003cli\u003eTwo bespoke rounded high-flow dry panel filters\u003c\/li\u003e\n\u003cli\u003eDouble-layer filtration medium tested to ISO 5011\u003c\/li\u003e\n\u003cli\u003eManufacturer flow-bench results: 531 CFM versus 381 CFM for the factory system, averaged per airbox\u003c\/li\u003e\n\u003cli\u003eApproximately 39% increase in measured maximum airflow capacity\u003c\/li\u003e\n\u003cli\u003eUpper airbox clearance increased from 23mm to 56mm\u003c\/li\u003e\n\u003cli\u003eLower airbox inlet height increased from approximately 43mm to 74mm\u003c\/li\u003e\n\u003cli\u003eApproximately 84% increase in lower airbox inlet cross-sectional area\u003c\/li\u003e\n\u003cli\u003eManufacturer-reported stock performance gains: 10–12 hp and 12–15 lb-ft\u003c\/li\u003e\n\u003cli\u003eManufacturer-reported Stage 2 performance gains: 22–30 hp and 20–24 lb-ft\u003c\/li\u003e\n\u003cli\u003eFour CNC-machined, black-anodized aluminum filter flanges\u003c\/li\u003e\n\u003cli\u003eTwo CNC-machined MAP sensor bosses\u003c\/li\u003e\n\u003cli\u003eFour CNC-machined rubber mount holders\u003c\/li\u003e\n\u003cli\u003eCustom EPDM couplers and laser-cut stainless steel mounting brackets\u003c\/li\u003e\n\u003cli\u003eHigh-gloss black carbon fiber finish\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: EVE-C63SV2-CF-INT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178928107674,"sku":"EVE-C63SV2-CF-INT","price":2950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/EventuriW205C63C63SAMGCarbonIntakeSystem_1.jpg?v=1794444978"},{"product_id":"eventuri-audi-8v-gen-2-rs3-black-carbon-headlamp-race-duct","title":"Eventuri Audi 8V Gen 2 RS3 Black Carbon Headlamp Race Duct","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e carbon headlamp race duct for the Audi 8V Gen 2 RS3 is a purpose-built motorsport component developed to deliver the most direct cold air feed possible to the intake system. By replacing the factory headlamp with a sealed carbon duct which integrates with the Eventuri Stage 3 intake, this system creates a true high-speed RAM-air configuration for maximum airflow under load.\u003c\/p\u003e\n\u003cp\u003eThe duct follows the external geometry of the OEM headlamp to maintain the vehicle’s front-end profile while internally incorporating twin carbon air guides which channel incoming airflow directly toward the intake filter. Surface venting positioned perpendicular to the oncoming air stream reduces drag while allowing pressure to be managed at high speed.\u003c\/p\u003e\n\u003cp\u003eTrack testing at speeds exceeding 190mph confirmed that the airflow advantage significantly outweighs any aerodynamic penalty, resulting in improved consistency and reduced heat soak during repeated runs. With the factory intake duct removed, the slam panel area remains open, allowing ambient air to pass over the engine for additional cooling while the intake receives a direct, uninterrupted supply of cold air.\u003c\/p\u003e\n\u003cp\u003eThis component is designed for dedicated race and drag applications where maximum airflow and thermal stability are required.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNOT STREET LEGAL – REPLACES ONE FRONT HEADLAMP\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect RAM-air cold air feed to the Eventuri intake system\u003c\/li\u003e\n\u003cli\u003eReplaces factory headlamp assembly\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fiber headlamp duct construction\u003c\/li\u003e\n\u003cli\u003eInternal twin carbon air guides for directed airflow\u003c\/li\u003e\n\u003cli\u003eCarbon connecting duct to intake system\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel mounting brackets\u003c\/li\u003e\n\u003cli\u003eReduces heat soak for consistent track and drag performance\u003c\/li\u003e\n\u003cli\u003eOpens slam panel area for additional engine cooling\u003c\/li\u003e\n\u003cli\u003eMaintains OEM exterior headlamp profile\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178928009370,"sku":"EVE-ST38V8S-CF-HDP","price":895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/Eventuri_8V_RS3_Carbon_Headlamp_Race_Duct_1.jpg?v=1794444977"},{"product_id":"eventuri-mercedes-w205-c63-c63s-amg-black-carbon-v2-duct-upgrade-kit-for-v1","title":"Eventuri Mercedes W205 C63 \/ C63S AMG Black Carbon V2 Duct Upgrade Kit For V1","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eEventuri Replacement Part\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Black Carbon V2 Duct Upgrade Kit for the Mercedes-Benz W205 C63 and C63S AMG has been developed for owners of the original V1 intake system who want to step up to the latest airflow architecture without replacing the complete intake. By upgrading to the V2 carbon ducts, the intake system benefits from a revised airflow path, increased efficiency, and the enhanced visual presence of Eventuri’s latest carbon fiber design.\u003c\/p\u003e\n\u003cp\u003eThe V2 duct geometry has been refined to improve the transition of air from the front inlets into the filter housings, reducing turbulence and maintaining a smoother, more consistent airflow toward the turbochargers. This results in improved throttle response, more efficient charge air delivery, and a sharper induction character under load, particularly at higher RPM where the M177 engine demands greater intake volume.\u003c\/p\u003e\n\u003cp\u003eEach duct is produced from pre-preg 2x2 twill carbon fiber and finished in Eventuri’s signature high-gloss black carbon. The upgrade integrates directly with the existing Eventuri V1 intake system using OEM mounting locations, ensuring factory-level fitment and a straightforward installation. For customers already running the V1 system, this kit provides the most direct path to the performance and aesthetic improvements of the V2 configuration.\u003c\/p\u003e\n\u003cp\u003eBeyond the functional gains, the V2 ducts update the engine bay with the latest Eventuri carbon architecture, delivering a more cohesive and aggressive appearance which matches the performance character of the W205 C63 platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned to upgrade the Eventuri V1 intake system to V2 specification\u003c\/li\u003e\n\u003cli\u003eCompatible with Mercedes-Benz W205 C63 and C63S AMG\u003c\/li\u003e\n\u003cli\u003eRevised duct geometry for improved airflow efficiency\u003c\/li\u003e\n\u003cli\u003ePre-preg 2x2 twill carbon fiber construction\u003c\/li\u003e\n\u003cli\u003eHigh-gloss black carbon finish\u003c\/li\u003e\n\u003cli\u003eDirect integration with existing Eventuri V1 intake system\u003c\/li\u003e\n\u003cli\u003eUtilizes OEM mounting locations for precise fitment\u003c\/li\u003e\n\u003cli\u003eEnhances induction response and intake system efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178928205978,"sku":"EVE-C63S-DCT","price":215.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/EventuriMercedesW205C63SAMG-CarbonFiberDuctSet_5.jpg?v=1794444983"},{"product_id":"eventuri-mercedes-c190-r190-amg-gt-gts-gtr-black-carbon-intake-engine-cover-gloss","title":"Eventuri Mercedes C190 \/ R190 AMG GT \/ GTS \/ GTR Black Carbon Intake + Engine Cover - Gloss","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Black Carbon Intake System with matching Engine Cover for the Mercedes C190 \/ R190 AMG GT, GTS, and GTR is a fully sealed performance upgrade developed through extensive real-world testing and advanced airflow simulation analysis. Designed to improve turbocharger efficiency while maintaining stable intake air temperatures, this system delivers measurable gains without compromising refinement.\u003c\/p\u003e\n\u003cp\u003eAt the core of the system are Eventuri’s patented carbon fiber Venturi filter housings. Engineered to promote smooth, laminar airflow toward the turbo inlets, the housings reduce aerodynamic drag and allow the turbochargers to operate more efficiently across the rev range. The enlarged internal volume further minimizes restriction compared to the factory configuration.\u003c\/p\u003e\n\u003cp\u003eTo accommodate the increased system capacity, Eventuri redesigned the OEM central engine cover, replacing it with a matching pre-preg carbon fiber center cover that integrates seamlessly with the intake architecture. The result is not only improved airflow efficiency, but a dramatic enhancement in engine bay presentation.\u003c\/p\u003e\n\u003cp\u003eThermal management is addressed through sealed carbon inlet ducts which mate precisely with the filter housings, ensuring the system draws ambient air while minimizing heat soak within the tightly packaged AMG GT engine bay. Independent testing conducted by world-leading Mercedes tuning specialists at RENNtech confirmed performance gains on both stock and tuned vehicles.\u003c\/p\u003e\n\u003cp\u003eConstructed entirely from high-quality pre-preg carbon fiber and supported by precision CNC-machined components and stainless steel bracketry, the system maintains OEM-level fitment while delivering enhanced throttle response, improved turbo efficiency, and a more pronounced induction character.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the Gloss Carbon Fiber finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered for Mercedes C190 \/ R190 AMG GT, GTS, and GTR models\u003c\/li\u003e\n\u003cli\u003eFully sealed intake system designed to reduce heat soak\u003c\/li\u003e\n\u003cli\u003eDual patented pre-preg carbon fiber Venturi filter housings\u003c\/li\u003e\n\u003cli\u003eGeneration 2 bespoke high-flow dry cone filters\u003c\/li\u003e\n\u003cli\u003eDual carbon fiber inlet ducts\u003c\/li\u003e\n\u003cli\u003eRedesigned gloss carbon fiber center engine cover included\u003c\/li\u003e\n\u003cli\u003e2 x CNC-machined stainless steel outlet flanges\u003c\/li\u003e\n\u003cli\u003e2 x CNC-machined MAP sensor bosses\u003c\/li\u003e\n\u003cli\u003eIntegrated heat shields for thermal stability\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel mounting brackets\u003c\/li\u003e\n\u003cli\u003eIndependent performance gains of approximately 12–18hp and 10–15 lb-ft\u003c\/li\u003e\n\u003cli\u003eOEM-level fitment utilizing factory mounting points\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178928369818,"sku":"EVE-AMGGT-CF-INT","price":2595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/AMG-GT-1_d868a55c-3c64-41d9-9879-e5a140ba5e4c.jpg?v=1794444983"},{"product_id":"eventuri-bmw-f8x-m2c-m3-m4-s55-black-carbon-charge-pipe-set-matte","title":"Eventuri BMW F8X M2C M3 M4 S55 Black Carbon Charge Pipe Set - Matte","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Matte Black Carbon Charge Pipe Set for the BMW F8X M2 Competition, M2 CS, M3, and M4 has been engineered to deliver improved airflow efficiency, superior strength, and OEM-level fitment for the S55 platform. Developed through extensive research and testing, these carbon charge pipes address the common shortcomings found in factory plastic pipes and many aftermarket alternatives while maintaining the premium construction expected from Eventuri.\u003c\/p\u003e\n\u003cp\u003eFitment precision was a primary focus during development. Poorly designed charge pipes can interfere with the engine cover, contact the hood, or create clearance issues with aftermarket intake systems. By utilizing rigid pre-preg carbon fiber rather than silicone or metal, Eventuri was able to tightly control dimensional tolerances within the confined engine bay. The result is a charge pipe solution that integrates cleanly with surrounding components while supporting a seamless installation experience.\u003c\/p\u003e\n\u003cp\u003eDrawing from their expertise in intake airflow design, Eventuri engineered these pipes with smooth curvature transitions from the turbo outlets to the charge-cooler. Turbulence is minimized through carefully modeled internal geometry, while the increased internal volume allows the turbos to operate with reduced restriction.\u003c\/p\u003e\n\u003cp\u003eStrength and durability are equally critical for the S55 engine, where the factory plastic charge pipes are known to weaken over time, especially under higher boost pressures. Eventuri addresses this with a multi-layer, cross-directional carbon fiber weave forming a robust 2mm wall thickness. Embedded CNC-machined stainless steel rings reinforce the clamp regions, helping the pipes retain their shape even under significant clamping loads.\u003c\/p\u003e\n\u003cp\u003eFinished in matte carbon fiber, the charge pipes provide a purposeful motorsport aesthetic that complements both factory and aftermarket engine bay upgrades.\u003c\/p\u003e\n\u003cp\u003eIND also offers an exclusive customization option, allowing the raised “V” logos on the charge pipes to be professionally painted in your choice of color. This bespoke finish creates an OEM+ appearance and provides an opportunity to coordinate with factory paintwork, brake calipers, or other engine bay accents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits BMW F87 M2 Competition \/ M2 CS, F80 M3 \/ M3 CS, F82 M4 \/ M4 CS, and F83 M4 with the S55 engine\u003c\/li\u003e\n\u003cli\u003eConstructed from high-temperature pre-preg carbon fiber\u003c\/li\u003e\n\u003cli\u003eSmooth internal geometry reduces turbulence and improves airflow efficiency\u003c\/li\u003e\n\u003cli\u003eIncreased internal volume supports higher airflow demand\u003c\/li\u003e\n\u003cli\u003eMulti-layer carbon construction with approximately 2mm wall thickness for enhanced durability\u003c\/li\u003e\n\u003cli\u003eEmbedded CNC-machined stainless steel rings reinforce clamp regions\u003c\/li\u003e\n\u003cli\u003eCNC-machined turbo flanges for precise fitment\u003c\/li\u003e\n\u003cli\u003eOEM-like fitment engineered to prevent interference with engine covers and surrounding components\u003c\/li\u003e\n\u003cli\u003eMatte carbon fiber finish for a refined motorsport appearance\u003c\/li\u003e\n\u003cli\u003eOptional IND-exclusive painted “V” logo for a custom OEM+ aesthetic\u003c\/li\u003e\n\u003cli\u003eSilicone couplers with oil-resistant lining\u003c\/li\u003e\n\u003cli\u003eMarine-grade stainless steel hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178928533658,"sku":"EVE-S55-CF-CHG","price":895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-s55-matte-carbon-charge-pipes-bmw-m2c-m3-m4-white.jpg?v=1794444984"},{"product_id":"eventuri-mercedes-glc63s-amg-black-carbon-intake-system","title":"Eventuri Mercedes GLC63S AMG Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Black Carbon Intake System for the Mercedes-AMG GLC63 and GLC63S is the result of extensive development to increase airflow, reduce intake temperatures, and maintain smooth, turbulence-free delivery to the turbochargers. The AMG M177 engine bay presents significant thermal challenges due to the close proximity of the turbochargers to the intake system, which makes a fully sealed carbon fiber solution critical for maintaining consistent performance.\u003c\/p\u003e\n\u003cp\u003eTo achieve a substantial increase in flow rate, Eventuri utilized every available volume within the factory airbox location and redesigned the internal geometry to remove sharp transitions. The result is an organically shaped intake path which allows the airflow to remain laminar as it moves from the bespoke high-flow panel filters to the turbo inlets. Compared to the stock airboxes which flow 347 CFM per side, the Eventuri system achieves 468 CFM per airbox, representing a significant increase in available airflow and allowing the turbos to operate more efficiently across the entire rev range.\u003c\/p\u003e\n\u003cp\u003eThermal efficiency is maintained through a fully sealed carbon fiber construction which prevents hot engine bay air from being ingested even under sustained load. With smoother airflow and reduced restriction, boost is generated with less effort, improving throttle response and delivering genuine performance gains which increase further on tuned vehicles. The system is available with two outlet sizes – 61mm for factory turbochargers and 76.5mm for upgraded turbo applications – making it suitable for both stock and high-output builds.\u003c\/p\u003e\n\u003cp\u003eManufactured from pre-preg carbon fiber and engineered for OEM-level fitment, the Eventuri intake transforms both the performance and the visual presence of the GLC63 engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlowbench tested: 468 CFM per airbox vs 347 CFM stock\u003c\/li\u003e\n\u003cli\u003ePerformance increase (stock): 10–12hp and 12–15ft-lb\u003c\/li\u003e\n\u003cli\u003ePerformance increase (Stage 2): 22–30hp and 20–24ft-lb\u003c\/li\u003e\n\u003cli\u003eFully sealed carbon fiber airbox system for low intake temperatures\u003c\/li\u003e\n\u003cli\u003eOrganically shaped internal airflow path for reduced turbulence\u003c\/li\u003e\n\u003cli\u003eAvailable with 61mm outlets for stock turbos\u003c\/li\u003e\n\u003cli\u003eAvailable with 76.5mm outlets for upgraded turbochargers\u003c\/li\u003e\n\u003cli\u003e2 x pre-preg carbon fiber airbox lids with turbo inlet transitions\u003c\/li\u003e\n\u003cli\u003e2 x pre-preg carbon fiber airbox bases with inlet duct transitions\u003c\/li\u003e\n\u003cli\u003e2 x bespoke high-flow performance panel filters\u003c\/li\u003e\n\u003cli\u003eCNC machined stainless steel inlet flanges\u003c\/li\u003e\n\u003cli\u003eCNC machined aluminum filter flanges\u003c\/li\u003e\n\u003cli\u003eCNC machined MAP sensor bosses\u003c\/li\u003e\n\u003cli\u003eCNC machined rubber mount holders\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel bracketry\u003c\/li\u003e\n\u003cli\u003eOEM-level fitment and mounting locations\u003c\/li\u003e\n\u003cli\u003eReplacement air filters: Eventuri Type C – EVE-C63-FTR\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178928435354,"sku":"EVE-GLC63S-CF-INT","price":2950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/EventuriGLC63GLC63SAMGCarbonIntakeSystem13.jpg?v=1794444983"},{"product_id":"eventuri-bmw-f10-m5-colored-kevlar-intake-system","title":"Eventuri BMW F10 M5 Colored Kevlar Intake System","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOnly available while supply lasts - Discontinued\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe F10 M5 \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e system uses Eventuri's patented Carbon fiber Housing which provides an aerodynamically efficient airflow path from the filter to the MAF tube. Not just another cone filter with a heat shield but a unique design which invokes the Venturi effect.\u003c\/p\u003e\n\u003cp\u003eThe F10 M5 intake system was developed through extensive dyno testing, maximum velocity tests and flow optimization. Eventuri has developed a complete system from front air ducts to filter housings and even inlet tubes to the turbos. The resulting system is very efficient and reduces the resistance to the turbos by giving a smooth path for the airflow to travel through.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFINISH:\u003c\/strong\u003e The Venturi filter housings and front scoops are supplied in the selected red or blue Kevlar finish. The left and right inlet tubes are supplied in black carbon fiber. Product photography may show different inlet tube finishes; current kits include black carbon fiber inlet tubes.\u003c\/p\u003e\n\u003cp\u003eEach kit consists of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 Kevlar Venturi housings in the selected color\u003c\/li\u003e\n\u003cli\u003e2 High Flow Double Cone Air Filters\u003c\/li\u003e\n\u003cli\u003e2 Aluminum Cowls for smooth airflow entry\u003c\/li\u003e\n\u003cli\u003eLeft and Right Black Carbon Fiber Inlet Tubes with Integrated MAF Sensor Mounts\u003c\/li\u003e\n\u003cli\u003e2 Kevlar Front Scoops in the selected color\u003c\/li\u003e\n\u003cli\u003e2 Laser Cut Aluminum Shields with integrated flow deflectors\u003c\/li\u003e\n\u003cli\u003eHigh quality Silicon coupler with BMW specification hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e** This item is not eligible for return **\u003c\/strong\u003e\u003c\/p\u003e","brand":"IND Distribution","offers":[{"title":"Red Kevlar","offer_id":68178928304282,"sku":"EVE-F10M5-KV-INT-R","price":2745.0,"currency_code":"USD","in_stock":true},{"title":"Blue Kevlar","offer_id":68178928337050,"sku":"EVE-F10M5-KV-INT-B","price":2745.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/53197447126_89683e0dc3_b.jpg?v=1794444983"},{"product_id":"eventuri-bmw-f97-x3m-f98-x4m-replacement-panel-filter-set","title":"Eventuri BMW F97 X3M \/ F98 X4M Replacement Panel Filter Set","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e BMW F97 X3M \/ F98 X4M Replacement Panel Filter Set is a high-flow drop-in upgrade designed to improve airflow efficiency while retaining the factory airbox configuration. Engineered using the same development philosophy as Eventuri’s complete carbon intake systems, these panel filters are built with advanced materials and validated through CFD analysis, airflow testing, and dyno development.\u003c\/p\u003e\n\u003cp\u003eUnlike conventional paper elements, Eventuri utilizes a proprietary non-woven mesh construction that delivers significantly higher flow rates while maintaining effective filtration. The result is reduced restriction, improved turbo efficiency, and more consistent performance under load, whether paired with the factory intake system or installed within a full Eventuri carbon intake setup.\u003c\/p\u003e\n\u003cp\u003eThis replacement set is ideal for owners seeking a performance-focused service interval upgrade, increased airflow for tuned vehicles, or direct replacements for existing Eventuri intake filters. By lowering intake restriction while maintaining OEM airbox integrity, the system supports sharper throttle response and optimized airflow without altering factory fitment.\u003c\/p\u003e\n\u003cp\u003eEach kit includes four filters in total, two large and two small, ensuring complete coverage for the S58-powered F97 X3M and F98 X4M platforms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement high-flow panel filter set\u003c\/li\u003e\n\u003cli\u003eDesigned for use with factory airboxes or Eventuri intake systems\u003c\/li\u003e\n\u003cli\u003eConstructed from advanced non-woven mesh material\u003c\/li\u003e\n\u003cli\u003eHigher airflow rate compared to OEM paper filters\u003c\/li\u003e\n\u003cli\u003eEngineered and validated through CFD and airflow testing\u003c\/li\u003e\n\u003cli\u003eSupports improved turbo efficiency and throttle response\u003c\/li\u003e\n\u003cli\u003eMaintains OEM fitment and sealing\u003c\/li\u003e\n\u003cli\u003eService-friendly drop-in installation\u003c\/li\u003e\n\u003cli\u003eIncludes 4 filters per kit: 2 large and 2 small\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered in the UK\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178928468122,"sku":"EVE-FX34M-PF","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-bmw-f97-f98-x3m-x4m-panel-filter-set-white-background.jpg?v=1794444983"},{"product_id":"eventuri-bmw-e85-e86-z4m-s54-colored-kevlar-intake-system-yellow","title":"Eventuri BMW E85 \/ E86 Z4M S54 Colored Kevlar Intake System - Yellow","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOnly available while supply lasts - Discontinued\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe E85 \/ E86 Z4M \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e intake system uses their patented Carbon fiber Housing which provides an aerodynamically efficient airflow path from the filter to the MAF tube. Not just another cone filter with a heat shield but a unique design which invokes the Venturi effect.\u003c\/p\u003e\n\u003cp\u003eThe E85 \/ E86 Z4M  intake system is a result of extensive data logging, dyno testing and design optimization. Eventuri's aim was to develop an intake system for the S54 engine which worked with the stock ECU map and MAF sensor and produced a genuine improvement in the driving experience.\u003c\/p\u003e\n\u003cp\u003ePerformance increase = 10-15hp \/ 8-12ft-lb torque\u003c\/p\u003e\n\u003cp\u003eEach kit consists of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e100% Pre-preg Carbon Fiber Intake Housing\u003c\/li\u003e\n\u003cli\u003eAnodized Aluminum inlet heatshield mount\u003c\/li\u003e\n\u003cli\u003eHigh Flow Filter\u003c\/li\u003e\n\u003cli\u003eCNC Machined MAF tube\u003c\/li\u003e\n\u003cli\u003e100% Anodized Aluminum Air Scoop\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh quality Silicon coupler with BMW specification hose clamps\u003c\/li\u003e\n\u003cli\u003eReplacement filter: (1) Eventuri Type B (EVE-661-G2-FTR)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e** This item is not eligible for return **\u003c\/strong\u003e\u003c\/p\u003e","brand":"IND Distribution","offers":[{"title":"Yellow Kevlar","offer_id":68178928402586,"sku":"EVE-Z4M-KV-INT-Y","price":1035.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/53206098288_8d82468792_b.jpg?v=1794444983"},{"product_id":"eventuri-bmw-f97-x3m-f98-x4m-black-carbon-intake-system","title":"Eventuri BMW F97 X3M \/ F98 X4M Black Carbon Intake System","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Black Carbon Intake System for the BMW F97 X3M and F98 X4M was developed with a focused engineering philosophy: refine and enhance the strengths of the factory intake rather than completely redesign a system that already benefits from a relatively direct airflow path. While the OEM airboxes perform well within the packaging constraints of BMW’s S58-powered SAV platform, Eventuri identified key opportunities to reduce restriction, improve thermal efficiency, and elevate overall induction character.\u003c\/p\u003e\n\u003cp\u003eAt the core of the system are Eventuri’s high-flow, non-woven mesh filters which provide substantially greater airflow compared to the restrictive factory paper elements. These filters are paired with precision-designed carbon fiber air scoops positioned directly behind the front grilles. The scoops channel a larger volume of ambient air into the intake ducts, effectively de-restricting the inlet path while helping maintain lower intake temperatures under load.\u003c\/p\u003e\n\u003cp\u003eCompleting the system is a pre-preg carbon fiber airbox lid which replaces the factory plastic component. While the lid primarily enhances engine bay aesthetics, it also allows for a more pronounced and refined induction sound, adding a subtle but engaging acoustic layer to the S58 without compromising daily drivability.\u003c\/p\u003e\n\u003cp\u003eConstructed from Eventuri’s signature pre-preg carbon fiber, each component is manufactured with tightly controlled resin content for superior strength, reduced weight, and an exceptionally consistent finish. The system installs using laser-cut stainless steel brackets and integrates seamlessly with factory mounting locations for an OEM-level fit.\u003c\/p\u003e\n\u003cp\u003eThe result is an intake solution that preserves the intelligent foundation of BMW’s original design while unlocking additional airflow, improving temperature stability, and delivering the premium visual presence expected from an Eventuri carbon system. Independent testing recorded a measurable 0.2 second reduction in 60–130mph acceleration, reinforcing the performance capability of this carefully engineered upgrade.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered specifically for the BMW F97 X3M and F98 X4M with the S58 engine\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fiber airbox lid for lightweight strength and OEM-level fitment\u003c\/li\u003e\n\u003cli\u003eDual carbon fiber front air scoops increase airflow to the intake ducts\u003c\/li\u003e\n\u003cli\u003eFour high-flow non-woven mesh filters with significantly higher flow rates than factory paper filters\u003c\/li\u003e\n\u003cli\u003eImproves inlet efficiency while helping maintain lower intake temperatures\u003c\/li\u003e\n\u003cli\u003eEnhanced induction sound without introducing excessive cabin noise\u003c\/li\u003e\n\u003cli\u003eLaser-cut stainless steel mounting brackets included\u003c\/li\u003e\n\u003cli\u003eDirect integration with factory mounting points for straightforward installation\u003c\/li\u003e\n\u003cli\u003eAcceleration improvement: 60–130mph reduced by approximately 0.2 seconds\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178928500890,"sku":"EVE-FX34M-V2-INT","price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/Eventuri-BMW-F97-X3M-F98-X4M-Carbon-Intake-System-White-Background.jpg?v=1794444984"},{"product_id":"eventuri-bmw-g20-3-series-b48-black-carbon-intake-system-pre-november-2018","title":"Eventuri BMW G20 3-Series B48 Black Carbon Intake System - PRE November 2018","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/ind-distribution.com\/collections\/eventuri\"\u003eEventuri\u003c\/a\u003e Carbon Intake System for the BMW G20 3 Series B48 2.0T has been developed to provide a less restrictive airflow path to the turbocharger while maintaining low intake air temperatures. The factory BMW airbox is designed primarily for packaging and sound suppression, which creates airflow limitations under higher load conditions. The Eventuri system replaces this restrictive OE airbox with a fully sealed carbon fiber intake assembly engineered for performance.\u003c\/p\u003e\n\u003cp\u003eThe system features Eventuri’s patented Venturi housing concept. Unlike conventional open cone or heat shield designs, the Eventuri housing creates a controlled and smooth airflow path from the filter to the turbo inlet, helping to maintain laminar flow and reduce turbulence. The result is improved turbo efficiency, enhanced throttle response, and consistent performance gains.\u003c\/p\u003e\n\u003cp\u003eDuring development, heat management and internal air volume were key priorities. The intake location on the G20 platform exposes it to significant engine bay heat. Eventuri addressed this by designing a sealed housing that isolates the filter from hot air while maximizing internal volume to reduce pressure drop and heat soak.\u003c\/p\u003e\n\u003cp\u003eThe system also incorporates additional cold air feed paths, utilizing the factory ducting and supplementary openings to ensure a consistent supply of ambient air. The intake tube replaces the restrictive OE plastic tube with a smooth, larger diameter carbon fiber tube to further optimize airflow characteristics.\u003c\/p\u003e\n\u003cp\u003eConstructed from pre-preg carbon fiber and precision-engineered components, the Eventuri intake provides OEM-level fitment, premium aesthetics, and measurable performance improvements while retaining daily drivability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eG20 318i 320i 330i 330e B48 models PRE NOVEMBER 2018 - See Comparison Photo of intake sensors\u003c\/li\u003e\n\u003cli\u003ePre-preg carbon fiber Venturi housing\u003c\/li\u003e\n\u003cli\u003ePatented Venturi filter housing design\u003c\/li\u003e\n\u003cli\u003eHigh flow Eventuri Generation 2 air filter\u003c\/li\u003e\n\u003cli\u003eSmooth, larger diameter carbon fiber intake tube\u003c\/li\u003e\n\u003cli\u003eSealed intake assembly to minimize heat soak\u003c\/li\u003e\n\u003cli\u003eUtilizes factory and supplementary cold air feeds\u003c\/li\u003e\n\u003cli\u003eLaser cut mounting brackets\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation\u003c\/li\u003e\n\u003cli\u003eAvailable in gloss carbon fiber finish\u003c\/li\u003e\n\u003cli\u003eDesigned and hand-assembled in the UK\u003c\/li\u003e\n\u003cli\u003eReplacement filters: 1x EVE-15144-G2-FTR Eventuri Carbon Intake System Replacement Filter – Type L\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IND Distribution","offers":[{"title":"Default Title","offer_id":68178929713306,"sku":"EVE-G20B48-V1-INT","price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0430\/4237\/3786\/files\/eventuri-bmw-g20-b48-carbon-intake-system-pre-nov-2018.jpg?v=1794445039"}],"url":"https:\/\/envisiontuning.com\/collections\/performance.oembed","provider":"Envision Tuning","version":"1.0","type":"link"}