FactionFab Rear Brake Upgrade Kit 2015-2021 WRX
FactionFab Rear Brake Upgrade Kit 2015-2021 WRX

FactionFab Rear Brake Upgrade Kit 2015-2021 WRX

1.10139.1

No reviews

$390.00

Only 7 left in stock

The FactionFab Brake Upgrade Kit ncludes new rotors, brake pads, and stainless-steel brake lines to improve the braking performance of your vehicle. 

REAR LOCATION 

FACTIONFAB SWEPT SLOT BI-DIRECTIONAL ROTOR PAIR REAR:

  • Rear location
  • Shallow Sharp-edged groves are milled into a high carbon cast iron disc to provide consistent pad contact and maximum friction over repetitive use
  • High-carbon content for wear resistance, thermal stability, and cracking resistance
  • Bi-directional design, meaning rotors are not side-specific
  • Symmetric vane castings to increase heat dissipation efficiency and thermal stability
  • Double-disc ground, non-directional finish
  • Mill balanced for reduced vibration
  • Precision machined with run-out spec of no more than .002", Disc Thickness Variation (DTV) of .0005"
  • Fully machined non-friction surfaces for perfect fitment
  • Sold as a pair
  • Electronically applied E-coating for corrosion resistance
  • 400-hour salt spray tested
  • Fully coated inside and out

FACTIONFAB F-SPEC REAR BRAKE PADS:

  • Rear location
  • Para-Aramid Composition
  • Ideal for auto-x, light track days, or aggressive street driving
  • 1300ºF maximum operating temperature to aid in fade resistance
  • Excellent modulation and initial bite
  • Pre-scorched compound to aid in cold weather modulation
  • O.E. gas slots and chamfers ensuring for safe efficient stopping while reducing noise associated with vibration
  • Positive molded technology provides safe and reliable stopping performance for the entire service life of the brake pad
  • The positive molded technology manufacturing process uses extreme pressure to compress the friction material and drives out any impurities or excess resins found in the brake pad
  • Precision cut backing plates ensure correct pad fitment in the caliper body eliminating vibrations and noise under braking
  • Mechanically attached application-specific pad shims are designed to eliminate noise associated with brake pad vibrations

 FACTIONFAB STAINLESS STEEL BRAKE LINES:

  • Rear location
  • PTFE Teflon inner liner to carry the fluid
  • Stainless steel woven middle layer for support of the inner liner
  • Abrasion-resistant, impact-resistant
  • Outer PCV clear abrasion resistant coating to aid in chaffing and protects the inner layers and stress relief at fitting locations
  • Each line is 4500psi burst pressure tested
  • Stainless steel precision machined fittings for perfect fit and corrosion resistance
  • Increased pedal feedback as a result of elimination of soft rubber lines which are prone to swelling and deforming
  • 100% model specific for perfect fitment
  • Includes hardware 

FITMENT NOTE:

  • This is for 2015+ WRX models WITHOUT the Eyesight option
  • This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


    Recently viewed