BRZ Exhaust

BRZ Exhaust: The Ultimate Guide with Envision Tuning Edition

Are you ready to unleash the full potential of your BRZ? Look no further, because we have got the ultimate guide for you! Welcome to Envision Tuning Edition, where we dive deep into transforming your BRZ exhaust system. Buckle up and get ready to revamp your ride with our expert tips, top-notch recommendations, and all the insider knowledge you need to take your vehicle's performance to exhilarating new heights. Whether you're a car enthusiast looking for an adrenaline-pumping experience or simply seeking that perfect growl from under the hood, this is your go-to resource. Let's embark on an unforgettable journey of upgrading your BRZ exhaust – it's time to make some serious noise!

Introduction to BRZ Exhaust Upgrades

The Subaru BRZ is a popular car among performance enthusiasts due to its lightweight design, rear-wheel drive layout, and precise handling. However, one aspect that often leaves room for improvement is the exhaust system. The stock exhaust on the BRZ may be sufficient for daily driving, but if you want to unlock its full potential on the track or simply enhance its sound and performance, an exhaust upgrade is a must.

In this guide, we will introduce you to the world of BRZ exhaust upgrades and how they can take your driving experience to the next level. From understanding the basics of exhaust systems to exploring different options available in the market, we've got you covered.

Before diving into specific upgrades, it's important to understand how an exhaust system works and why it plays a crucial role in your car's performance. The main function of an exhaust system is to remove gases produced during fuel combustion from the engine and release them into the atmosphere. This process helps keep your engine running smoothly by maintaining proper pressure levels.

Apart from its functional purpose, an exhaust system also has a significant impact on your car's overall performance. A well-designed aftermarket exhaust can increase horsepower and torque, improve throttle response and acceleration, as well as enhance fuel efficiency. Furthermore, it can add a deep growl or aggressive tone to your vehicle's sound – making it stand out among other cars on the road.

Importance of Upgrading Your BRZ Exhaust

Upgrading the exhaust system of your BRZ is one of the most popular and effective modifications you can make to improve its overall performance. The stock exhaust on a BRZ is designed for daily driving and does not fully utilize the potential power of the engine. By upgrading your BRZ exhaust, you can significantly enhance its sound, power, and overall driving experience.

Here are some reasons why upgrading your BRZ exhaust is crucial:

1. Improved Engine Performance:

The primary function of an exhaust system is to expel gases from the engine after combustion. A stock exhaust often restricts this process, resulting in backpressure that hinders the engine's ability to breathe freely. By upgrading to a high-performance aftermarket exhaust, you can reduce backpressure, which allows for smoother airflow and better engine performance.

2. Enhanced Sound:

Let's be honest; one of the main reasons we upgrade our car's exhaust system is for that deep growl and aggressive tone it produces. A quality upgraded exhaust will give your BRZ a more aggressive sound that reflects its sporty nature. With options like header-back or cat-back systems, you have control over how loud or subtle you want your car to sound.

3. Increased Power:

As mentioned earlier, a stock exhaust often creates backpressure that robs your car of precious horsepower and torque. By installing an upgraded aftermarket exhaust system with larger piping diameters, smoother bends, and high-flow catalytic converters or mufflers, you can unleash all that hidden power from your

Envision Tuning: A Brief Overview

Envision Tuning is a leading company that specializes in performance tuning and customization for the Subaru BRZ. They are known for their expertise in exhaust systems, and have become a top choice for BRZ owners looking to upgrade their vehicle's exhaust.

Founded by a team of passionate car enthusiasts, Envision Tuning understands the importance of having a high-performing and efficient exhaust system. Their mission is to provide customers with top-quality products that not only enhance the overall driving experience, but also improve the power and sound of their vehicles.

One of the key aspects that sets Envision Tuning apart from other companies is their dedication to research and development. They use state-of-the-art technology and work closely with manufacturers to ensure that every product they offer meets their strict standards of quality and performance.

Envision Tuning offers a wide range of exhaust options for the BRZ, including cat-back systems, headers, downpipes, and more. Each product is designed specifically for the BRZ model, ensuring a perfect fitment and optimal performance.

Types of BRZ Exhaust Systems

When it comes to upgrading your BRZ exhaust, there are several options available for you to choose from. Each type of exhaust system offers a unique sound, performance gains, and aesthetic appeal. In this section, we will discuss the different types of BRZ exhaust systems and help you determine which one is the best fit for your vehicle.

1. Axle-Back Exhaust System:

The axle-back exhaust system is the most basic option for upgrading your BRZ's exhaust. It replaces only the muffler and tailpipe section of your stock exhaust with aftermarket components. This type of system is relatively easy to install and provides a deeper and more aggressive sound compared to the stock setup. However, it does not offer significant performance gains as it only affects the rear portion of the exhaust.

2. Cat-Back Exhaust System:

A cat-back exhaust system replaces all components from behind the catalytic converter to the tailpipe. This includes replacing the muffler, resonator, and piping. The primary advantage of a cat-back system is that it offers a significant increase in horsepower and torque due to its larger diameter piping and less restrictive design. Additionally, it also gives your BRZ a more aggressive tone without being too loud or obnoxious.

3. Header-Back Exhaust System:

As its name suggests, a header-back exhaust system replaces all components from behind the headers (or headers if equipped) to the tailpipe. This type of system provides even more significant performance gains than a cat-back.

Factors to Consider Before Upgrading Your BRZ Exhaust

When it comes to upgrading your BRZ exhaust, there are a few important factors that you should consider before making any decisions. Upgrading your exhaust can greatly impact the performance and sound of your vehicle, so it's crucial to carefully evaluate these factors before making any changes.

1. Performance Goals

One of the first things you should consider when deciding whether or not to upgrade your BRZ exhaust is your performance goals. Are you looking for more power and torque? Or do you simply want a deeper and more aggressive sound? Understanding your goals will help guide you in choosing the right type of exhaust system for your needs.

2. Budget

Another important factor to consider is your budget. Upgrading your BRZ exhaust can range from relatively affordable options like cat-back systems, to more expensive options like header-back systems or custom setups. It's important to determine how much you are willing to spend on an exhaust upgrade before starting the process.

3. Compatibility with Other Upgrades

If you have other modifications on your BRZ, such as a cold air intake or ECU tune, it's important to make sure that any new exhaust components will be compatible with them. Some aftermarket parts may require additional modifications or tuning in order to work properly together.

4. Material and Construction

The material and construction of an exhaust system can greatly affect its durability, weight, and performance capabilities. Stainless steel is a popular choice for its durability and resistance to corrosion, while titanium offers lighter weight but at a higher cost.

Performance goals

Performance goals are an important factor to consider when upgrading your BRZ exhaust. They determine the overall performance and efficiency of your vehicle, as well as its sound and appearance. In this section, we will discuss the various performance goals you should keep in mind while upgrading your BRZ exhaust.

1. Increased Horsepower and Torque:

One of the main reasons why many car enthusiasts upgrade their exhaust systems is to increase horsepower and torque. This is achieved by increasing the flow of exhaust gases, which allows for more air to enter the engine. With a higher airflow, the engine can burn fuel more efficiently, resulting in increased power output. Upgrading your BRZ exhaust can lead to significant gains in horsepower and torque, making your driving experience more exciting.

2. Improved Sound:

The sound of a car's exhaust is often considered a defining feature, especially among sports car enthusiasts. A deep growl or aggressive roar can make a huge difference in how people perceive your vehicle on the road. Upgrading your BRZ's exhaust with a high-performance system can give it a more aggressive and throaty sound that will turn heads wherever you go.

3. Enhanced Fuel Efficiency:

Contrary to popular belief, upgrading your BRZ's exhaust can actually improve its fuel efficiency. By allowing for better airflow through the engine, it reduces backpressure and helps burn fuel more efficiently. This results in improved fuel economy and potentially saving you money on gas in the long run.

Budget

When it comes to upgrading your BRZ exhaust, one of the most important factors to consider is your budget. Exhaust systems can range in price from a few hundred dollars to thousands, and it's essential to know what you're willing to spend before diving into the upgrade process.

First and foremost, it's crucial to determine your overall budget for the entire upgrade project. This should include not just the cost of the exhaust system itself but also any additional parts or labor that may be required. It's recommended to allocate at least 20-30% of your total budget for unforeseen expenses or upgrades that may come up during the process.

Once you have an idea of your overall budget, it's time to start researching different exhaust options within that price range. Keep in mind that while some cheaper options may seem appealing, they may not always deliver the desired results in terms of performance and sound quality. On the other hand, more expensive exhaust systems may offer top-of-the-line performance but could break the bank.

To help narrow down your choices, consider what type of driving experience you want from your BRZ. Are you looking for a louder and more aggressive sound? Or do you prefer a subtle and refined tone? Different exhaust systems will cater to different preferences, so make sure to read reviews and watch videos on how each option sounds before making a decision.

Sound preference

Sound preference is an important factor to consider when upgrading your BRZ exhaust. The sound of your car can greatly enhance the driving experience and make a statement about your personal style. In this section, we will discuss the different aspects of sound and how you can achieve your desired sound with the help of Envision Tuning.

1. Understanding Sound: Before diving into choosing the right exhaust for your BRZ, it is important to understand the basics of sound. Sound is produced by vibrations that travel through air molecules, creating waves that are perceived by our ears as sound. The pitch or tone of the sound depends on the frequency of these vibrations, while the loudness is determined by their amplitude.

2. Types of Sounds: When it comes to car exhausts, there are primarily two types of sounds - aggressive and mellow. Aggressive sounds are characterized by a deep, throaty roar that commands attention and gives off a powerful and sporty vibe. On the other hand, mellow sounds have a smoother tone with less volume and intensity.

The Envision Tuning Process for BRZ Exhaust Upgrades

Envision Tuning is a highly reputable and trusted name in the automotive industry, known for their expertise in performance tuning and aftermarket upgrades. When it comes to BRZ exhaust upgrades, Envision Tuning has developed a specialized process that ensures optimal results for your vehicle. In this section, we will delve into the Envision Tuning process for BRZ exhaust upgrades, giving you an insight into their methods and why they are considered the best in the business.

Step 1: Consultation and Assessment

The first step of the Envision Tuning process is to schedule a consultation with one of their expert technicians. This consultation allows them to understand your specific goals and preferences for your BRZ exhaust upgrade. They will also conduct a thorough assessment of your vehicle's current exhaust system to determine its condition and any potential areas for improvement.

Step 2: Customized Exhaust Design

Based on the information gathered from the consultation and assessment, Envision Tuning will design a customized exhaust system specifically tailored to your BRZ. Their team of experienced engineers uses advanced CAD software to create a detailed blueprint of your new exhaust system, taking into consideration factors such as flow dynamics, backpressure, and sound quality.

Step 3: Quality Materials Selection

Envision Tuning only uses high-quality materials in all their exhaust upgrades. They source premium grade stainless steel or titanium components that are not only durable but also lightweight – ensuring maximum performance gains without compromising on strength.

Consultation and Assessment

When it comes to upgrading your BRZ exhaust, one of the first steps you should take is consulting with a reputable and experienced tuner. A consultation and assessment will not only help you determine the right exhaust system for your specific needs and driving style, but it can also save you time and money in the long run.

During a consultation, a tuner will typically ask you questions about your current setup, your goals for upgrading your exhaust, and any other modifications or upgrades you may have made to your vehicle. They may also perform a visual inspection of your exhaust system to check for any potential issues or areas that may need attention.

The next step in the process is an assessment of your BRZ's performance. This can involve dyno testing to measure horsepower and torque output as well as air-fuel ratio readings to ensure optimal fuel delivery. By gathering this data, the tuner can get an accurate understanding of how your car is currently performing and identify any specific areas that could benefit from improvements.

Once all of this information has been gathered, the tuner can then make recommendations for which type of exhaust system would be best suited for your BRZ. This may include options like cat-back systems, headers, mid-pipes, or full turbo-back systems depending on what kind of power gains and sound characteristics you are looking for.

Customization Options

When it comes to upgrading your BRZ exhaust, customization options are key. Not only do they allow you to tailor your exhaust system to fit your specific performance needs and preferences, but they also add a unique touch to your vehicle's overall appearance.

At Envision Tuning, we offer a wide range of customization options for your BRZ exhaust. From the type of material used to the design and sound, our goal is to provide you with a fully customizable experience that enhances the performance and aesthetics of your vehicle.

Here are some of the customization options available at Envision Tuning:

1. Material: The material used in your exhaust system can have a significant impact on its overall performance. At Envision Tuning, we offer three main types of materials for BRZ exhausts - stainless steel, titanium, and Inconel. Stainless steel is the most commonly used material due to its durability and affordability. Titanium is lighter than stainless steel and offers better heat resistance, making it ideal for high-performance vehicles. Inconel is a superalloy known for its extreme strength and ability to withstand high temperatures.
2. Exhaust Design: The design of your BRZ exhaust not only affects its look but also its performance. We offer various designs such as single exit, dual exit, quad exit, and more. Each design has its own advantages in terms of airflow efficiency and backpressure reduction.

Installation and Testing

Installing a new exhaust system on your BRZ can be an exciting and rewarding process. Not only will it improve the sound and performance of your vehicle, but it also adds a personal touch to your car. In this section, we will guide you through the installation and testing process for your upgraded BRZ exhaust from Envision Tuning.

1. Pre-Installation Preparation:

Before starting any installation, it is crucial to prepare all necessary tools and equipment. You will need a socket wrench set, jack stands or ramps, penetrating oil, safety glasses, gloves, and possibly a saw for cutting the old exhaust off if needed. It is also recommended to have a second person to assist with lifting and positioning the new exhaust.

2. Removing the Old Exhaust:

Start by jacking up the car or using ramps to gain access to the underside of your BRZ. Before removing any bolts or clamps, spray them with penetrating oil to make loosening them easier. Begin at the rear of the car by loosening and removing any mounting bolts or hangers attached to the muffler. Then work towards the front of the car until you reach where your headers meet with your catalytic converter.

3. Installing Your New Exhaust System:

With all old components removed, it's time to install your Envision Tuning exhaust system! Start at the front end of your BRZ by attaching the Y-pipe (if applicable) onto where your headers meet with your catalytic converter using new gaskets if included in

Customer Test

When it comes to choosing the right exhaust for your BRZ, hearing from other customers who have already made the upgrade can be extremely helpful. Customer reviews and testimonials are a great way to get unbiased feedback on the performance, sound, and overall satisfaction of a particular exhaust system.

At Envision Tuning, we pride ourselves on providing top-quality products and exceptional customer service. We have received numerous positive reviews and testimonials from our satisfied BRZ owners who have upgraded their exhaust with us. Here are just a few of their experiences:

Sound Quality:

One of the most common praises we receive from our customers is about the sound quality of our exhaust systems. Many BRZ owners want an aggressive, sporty sound without being obnoxiously loud, and that's exactly what they get with our exhausts. One satisfied customer stated, "The tone is deep and throaty without being too loud or droning at highway speeds." Another one said, "I love how it sounds when I start up my BRZ in the morning – it puts a smile on my face every time."

Performance Gains:

Another important factor that our customers consider when upgrading their exhaust is performance gains. Our high-performance exhaust systems are designed to improve horsepower and torque while also reducing weight for better acceleration and handling. One of our customers shared his experience after installing our full cat-back system: "I noticed an immediate improvement in throttle response and overall power delivery. My BRZ feels much more lively now!"